What is a piping quick-drop for?

S-drop, T-drop, Quick Drop... what is the difference?

The piping in your system can make or break the profitability of your business. Lost power, loss of pressure, wet air, rusted tools and leak protection are just a few things that you experience with inefficient piping.

What causes a drop in pressure?

Ensuring your air compressor piping is properly sized and laid out is just as important as the air compressor you use. When air flows through a pipe there will be a pressure drop as the result of resistance to the flow. Friction loss occurs through any pipe fittings, bends, valves, or components on the piping system. Pressure loss is also due to a change in elevation of the piping, usually vertical piping.

1. Pipe Sizing: Restricting the flow path means that piping joints with different diameters will result in pressure loss.

2. Bends in the Piping: Turbulent flows occur in bent sections, making it difficult for fluids to flow. When this happens, normal flow changes to turbulent flow and energy loss will occur. Remember energy loss leads to lowered pressure.

3. Installing an open/close valve: If ball valves and other valves are left fully opened, then pressure loss should not be a concern. However, with valves that change the flow path inside the valve, pressure loss will occur even if fully opened.

4. Install a flow meter: Flow meters restrict and quicken the flow path in order to provide stable vibrations. The flow path is restricted in order to generate enough thrust to spin the paddles when there is small flow. For these types of flow meters, pressure loss occurs easily.

S-Drop and T-Drop

S-Drop: A system curve often resembles the letter "S". Water flowing under the power of gravity curves through the piping. When water is flowing in the pipe friction loss occurs that reduces the pressure energy at all points along the pipe.

T-Drop: Exactly how it sounds, piping extends across and the air drops down in between making the shape of a "T". Disadvantages of the "T" drop is that the moisture flows down the air tunnel with the air.

Quick-Drop, The Best Choice

AIRnet (available in both aluminum and stainless steel) offers moisture-eliminating drop fittings called Quick Drops. Quick Drops make “drop-tees” obsolete, removing the need for extra parts and pipe, while saving time and money. Quick Drops provide for a vertical AND horizontal option. AIRnet simplifies the addition of drops into the header loop by putting the hole-saw guide ON the Quick Drop. No drill jigs, bulky guides, or extra tools required. The hole for a Quick Drop is also on the side to ensure the air continues to stay dry as it enters your tools. A huge benefit is that a Quick Drop can also be added to existing systems to help maintain dry air.


Do you have an idea for our #expertcorner? Let us know!

Useful links:

Book Your Compressor Service



Who we are and how Ash Air can help your business!

Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.We look after all things compressed air for your business!

  • Reciprocating, Screw, air compressors
  • Vacuum pumps
  • Nitrogen
  • An extensive line of air treatment components

Ash Air's range of Chicago Pneumatic, Alup, Pneumatech, and Quincy compressors are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world class compressors here in the land of the long white cloud.Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported by a 13 locations nationwide, Ash Air offers one of the widest selections of compressed air equipment and parts available today in New Zealand.

Reliability and Efficiency

With Ash Air compressors, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:

  • Increasing uptime
  • Reducing unexpected repairs
  • Reducing energy consumption
  • Improving the cleanliness of compressed air


Talk to the team today:  CONTACT US CONTACT US

Read more from our #expertcorner


Just like any other equipment, a compressed air installation also requires the necessary maintenance work during its entire lifespan. Even though maintenance costs are only about 5 to 10% of a machine's annual operating costs, failure to budget for maintenance can have potentially disastrous consequences. …


The air dyer is one of the most ignored cooler in the system. A dirty condenser will cause water in the lines, or worse it will cause complete dryer failure. …


Using nitrogen is not about fully replacing CO2, but it can reduce their consumption of CO2 by close to 70%. Using nitrogen is about sustainability. Creating your own nitrogen is easy and will reduce the use of a greenhouse gas, which is better for the environment. It will also save you money as early as month one adding that savings to your bottom line. …


A question that is occasionally asked by our customers to Ash Air is 'what is the cost of compressed air?'  This article looks at the product costs involved with compressed air, as well as minimising the energy cost of compressors and cost allocation. When looking at these factors, we need to realise what causes dropped efficiency of your compressor, leading to increased costs of compressed air. …


You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed.  …


Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. Failure to follow best practice can result in injuries, associated production downtime and decreased productivity. …


A common questions asked is why do I need an air dryer for my compressor? Typically, air compressors produce water, and although the water can be drained, there can still be aerosol and vapour droplets that are present. This is because water cannoet be compressed. Water can damage your compressor by corroding the valves, pipes and machinery controls, which will cost you time and money to resolve. In the long run, the cost of a new compressor is a small price to pay compared to the loss of production that could potentially arise due to water damage in your compressor.





…


Air compressors can fail for an assortment of different reasons: Normal wear and tear, lifespan and age of the unit, poor maintenance, power surge, install issues are just a few the come to mind. Check out this blog to find out our top 7 tips to ensure your compressor is looked after!  …

Show More