OUR COMPRESSOR SERVICES

Installation & Pipe Work Solutions

We sell, install, and service air compressors, vacuum pumps, and medical gas equipment. We also build pipe-work systems and make sure that your compressor room is suitable for the compressors to work well. More than 1,000 businesses all over New Zealand trust us to set-up, upgrade, and look after their compressed air and vacuum systems. We have helped them save costs, improve performance and achieve maximum efficiency. AIRnet is a compressed air piping system that delivers quality air exactly where you need it, from a compressor to the point of use.
  • FAST AIRnet saves you 70% on installation time vs. traditional piping systems
  • EASY 3 simple steps: CUT to length and deburr, INSERT in the fitting on the marked depth, SECURE and tighten correctly
  • RELIABLE All AIRnet products come with a 10-year warranty on all fittings and pipes, against any damages resulting from material defect


BOOK YOUR COMPRESSOR SERVICE ONLINE HERE BOOK YOUR COMPRESSOR SERVICE ONLINE HERE

Pipework solutions

We offer AIRnet Piping Solutions


AIRnet is a fast, easy and reliable piping system, designed for compressed air, vacuum, and other inert gas applications from the source to the point of use with the lowest total cost of ownership.


FAST

AIRnet saves you 70% on installation time vs. traditional piping systems  

EASY

3 simple steps: CUT to length and deburr, INSERT in the fitting on the marked depth, SECURE and tighten correctly 

RELIABLE

All AIRnet products come with a 10-year warranty on all fittings and pipes, against any damages resulting from material defect 

Save the money that other piping systems spend

If you look at your total cost of ownership, AIRnet will turn out to be the best investment choice you can make. Airnet piping network is engineered to support sustainable operational excellence in your production process. Material and product design, installation and maintenance costs, flexibility and safety - they all influence your total cost of ownership and the level of efficiency in your production.

Sustaining energy efficiency

AIRnet keeps your energy costs down. The AIRnet pipes and seamless connections have superior sealing to prevent leaks and reduce friction to a minimum. This prevents pressure drops, saves energy and contributes to the sustainability of your production.

For any existing piping network

AIRnet supports the dynamics of your business. The comprehensive product range gives the flexibility to use the system for a wide range of applications. It can be connected to any existing network within no time & its modular technology gives you the advantage of modifying / expanding your network without affecting your production. AIRnet is the future-proof solution!

Call us to discuss how we can help you save costs, improve performance and achieve maximum efficiency.





AIRnet Aluminium installation is Fast, Easy and Reliable

AIRnet can be installed up to 85% faster than traditional piping system by one single technician. Installation is done with simple tools. No welding, gluing or crimping is required.





You can find applications everywhere: AIRnet systems are used in all sorts of industries.

Automotive

We understand the importance of pneumatics in the automobile industry. The non-corrosive properties of the AIRnet system will ensure that your downstream equipment is protected from rust and contamination.

Textile

Compressed air is used for spinning, weaving, knitting and several other processes. The AIRnet system provides clean air for these processes to ensure high quality fabrics are produced.

Railway

The maintenance of the locomotives and coaches is very crucial to ensure passenger safety and on time service. We provide a comprehensive piping solution to keep the maintenance sheds up and running.

Food & Beverage

The compressed air for Food and Beverage industry needs to be 100% oil free. AIRnet piping system is silicone free and now certified β€œclass 0” ensuring the purest air is delivered to the processes.

Recreation

From amusement parks to the hotels, several processes in their operations rely on the compressed air. Whether it’s a critical braking system of a roller coaster or powering up an animation figure to amuse the kids, AIRnet system will deliver the compressed air with zero leakage and minimum pressure drop.

Aerospace

For manufacturing, repairs and overhauls, the aviation industry uses compressed air as the primary energy source to power their equipment. AIRnet piping system is efficient, light weight, easy to install and reconfigure, and can be an ideal solution for the air distribution.

ASH AIR CAN HELP

Anytime, anywhere, you can count on us. How can we help you today? Air Compressor Service? Sales? Product Information? We would be happy to answer your questions!

Contact Us Contact Us    Icon not found 0800 808 486


Learn more about looking after your compressed air system and read more in the Ash Air Expert Corner Blog

Proportioning the Compressed Air Dryer

Trying to figure out which air dryer capacity is best for you? Here are some factors to consider.

Maintenance budget: 8 factors to consider

Just like any other equipment, a compressed air installation also requires the necessary maintenance work during its entire lifespan. Even though maintenance costs are only about 5 to 10% of a machine's annual operating costs, failure to budget for maintenance can have potentially disastrous consequences.

How to Clean Your Coils?

The air dyer is one of the most ignored cooler in the system. A dirty condenser will cause water in the lines, or worse it will cause complete dryer failure.

Why Replace CO2 with Nitrogen in your Brewery

Using nitrogen is not about fully replacing CO2, but it can reduce their consumption of CO2 by close to 70%. Using nitrogen is about sustainability. Creating your own nitrogen is easy and will reduce the use of a greenhouse gas, which is better for the environment. It will also save you money as early as month one adding that savings to your bottom line.

What do I need to know about ICONS?

ICONS: Intelligent Connectivity System: The insight into your compressed air system, wherever you are. Learn More about ICONS in this article here!

The Cost of Compressed Air

A question that is occasionally asked by our customers to Ash Air is 'what is the cost of compressed air?'Β  This article looks at the product costs involved with compressed air, as well as minimising the energy cost of compressors and cost allocation. When looking at these factors, we need to realise what causes dropped efficiency of your compressor, leading to increased costs of compressed air.

How to avoid falling objects when working at heights

You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed.Β 

How to prevent hose whiplash

Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. Failure to follow best practice can result in injuries, associated production downtime and decreased productivity.

Why do I need a dryer for my compressor?

A common questions asked is why do I need an air dryer for my compressor? Typically, air compressors produce water, and although the water can be drained, there can still be aerosol and vapour droplets that are present. This is because water cannoet be compressed. Water can damage your compressor by corroding the valves, pipes and machinery controls, which will cost you time and money to resolve. In the long run, the cost of a new compressor is a small price to pay compared to the loss of production that could potentially arise due to water damage in your compressor.





What are some preventable causes of air compressor failure?

Air compressors can fail for an assortment of different reasons: Normal wear and tear, lifespan and age of the unit, poor maintenance, power surge, install issues are just a few the come to mind. Check out this blog to find out our top 7 tips to ensure your compressor is looked after! 

Simple Ways to Reduce Your Compressed Air Costs?

Air compressors use considerable volumes of energy during a typical work cycle. When you add up all the expenses of operating a facility, any savings can help you boost your bottom line. 

What Should You Know When Buying a Compressor for the First Time?

If you have never bought a rotary screw air compressor before; do the following. Add up the air consumption of all the equipment at your shop. That will be the amount of air your desired compressor should provide.

Show More