Our offices are closed from the 21st December until 6th January.


What Vacuum Pump Do I Need?

Which vacuum pump do I need? - this is one of the most frequent questions we receive and this is understandable, because there are number of technologies which can provide the same vacuum level and pumping speed. Here is quick advice on how to choose the best vacuum pump for your needs.

 

Pumping speed of vacuum pump depends on vacuum level. Pump should be sized properly for duty point or duty range - vacuum level at which pump will be operating (not to be confused with nominal pumping speed referred to point at which pump actually never works). Important to remember that not every pump type can run continuously in the complete range.

Oil sealed vane pumps can overheat and “smoke” above 400 mbar. Choose dry vane, claw or liquid ring pump instead.
Setting exact required vacuum level helps to reduce energy consumption. This is possible with Quincy QSV and QCV vacuum pumps.

Time to reach required vacuum level is important in cyclic processes, for example for emptying vacuum chamber in food packaging. The shorter pump-down time – the faster cycle - the faster production. Pumping speed should be calculated from atmospheric pressure to duty point and pump should be able to handle complete range.

Demand for vacuum can change over time in a production process. This is typical for example for holding applications with CNC wood routers. QCV or QSV vacuum pump with variable speed drive can reduce energy consumption. Centralized systems where one pump with variable speed drive replaces multiple smaller pumps is an efficient way to distribute lead.

Sucked air goes through the vacuum pump. High temperature air, contamination, solvent vapor can come into contact with oil and damage the pump. If air contains vapors that can damage oil, opt for dry vacuum pump. It will help you to reduce maintenance cost. Also they are the best for handling saturated vapors. In this case pumping speed can increase by 15%.

High air temperature can decrease viscosity of the oil and lead to overheating.
Liquid ring pumps can handle particles without risk of damage, but their performance depends on water temperature and can greatly decrease in hot environment.

 

Do you have an idea for our #expertcorner? Let us know!

Useful links:

Air Dryers

Book Your Compressor Service

Who we are and how Ash Air can help your business!

Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.We look after all things compressed air for your business!

  • Reciprocating, Screw, air compressors
  • Vacuum pumps
  • Nitrogen
  • An extensive line of air treatment components

Ash Air's range of Chicago Pneumatic, Alup, Pneumatech, and Quincy compressors are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world class compressors here in the land of the long white cloud.Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported by a 13 locations nationwide, Ash Air offers one of the widest selections of compressed air equipment and parts available today in New Zealand.

Reliability and Efficiency

With Ash Air compressors, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:

  • Increasing uptime
  • Reducing unexpected repairs
  • Reducing energy consumption
  • Improving the cleanliness of compressed air


Talk to the team today:  CONTACT US CONTACT US

Read more from our #expertcorner



Just like any other equipment, a compressed air installation also requires the necessary maintenance work during its entire lifespan. Even though maintenance costs are only about 5 to 10% of a machine's annual operating costs, failure to budget for maintenance can have potentially disastrous consequences. …


The air dyer is one of the most ignored cooler in the system. A dirty condenser will cause water in the lines, or worse it will cause complete dryer failure. …


Using nitrogen is not about fully replacing CO2, but it can reduce their consumption of CO2 by close to 70%. Using nitrogen is about sustainability. Creating your own nitrogen is easy and will reduce the use of a greenhouse gas, which is better for the environment. It will also save you money as early as month one adding that savings to your bottom line. …


A question that is occasionally asked by our customers to Ash Air is 'what is the cost of compressed air?'  This article looks at the product costs involved with compressed air, as well as minimising the energy cost of compressors and cost allocation. When looking at these factors, we need to realise what causes dropped efficiency of your compressor, leading to increased costs of compressed air. …


You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed.  …


Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. Failure to follow best practice can result in injuries, associated production downtime and decreased productivity. …


A common questions asked is why do I need an air dryer for my compressor? Typically, air compressors produce water, and although the water can be drained, there can still be aerosol and vapour droplets that are present. This is because water cannoet be compressed. Water can damage your compressor by corroding the valves, pipes and machinery controls, which will cost you time and money to resolve. In the long run, the cost of a new compressor is a small price to pay compared to the loss of production that could potentially arise due to water damage in your compressor.





…


Air compressors can fail for an assortment of different reasons: Normal wear and tear, lifespan and age of the unit, poor maintenance, power surge, install issues are just a few the come to mind. Check out this blog to find out our top 7 tips to ensure your compressor is looked after!  …

Show More