The main ingredient of compressed air is, as you might have already guessed, air. Air is a gas mixture, which means it consists of many gases. Primarily these are nitrogen (78%) and oxygen (21%). It consists of different air molecules that each have a certain amount of kinetic energy.

The temperature of the air is directly proportional to the mean kinetic energy of these molecules. This means that the air temperature will be high if the mean kinetic energy is large (and the air molecules move faster). The temperature will be low when the kinetic energy is small.

Compressing the air makes the molecules move more rapidly, which increases the temperature. This phenomenon is called “heat of compression”. Compressing air is literally to force it into a smaller space and as a result bringing the molecules closer to each other. The energy that gets released when doing this is equal to the energy required to force the air into the smaller space. In other words it stores the energy for future use.

Let’s take a balloon for example. By inflating a balloon, air gets forced into a smaller volume. The energy contained in the compressed air within the balloon is equal to the energy needed to inflate it. When we open the balloon and the air gets released, it dissipates this energy and causes it to fly away. This is also the main principle of a positive displacement compressor.

Another example: If we take a look at our earth’s surface and its atmosphere, we can interpret it as a sea of air. The higher you are in this ocean, the lower the pressure would be. The lower you are (closer to sea level), the higher the pressure, because there will be more air pressing down on you. In other words, the air is more compressed at and below sea level than it is at the top of New Zealand's tallest mountain, Mt Cook!

Compressed air is an excellent medium for storing and transmitting energy. It’s flexible, versatile and relatively safe compared to other methods for storing energy, like batteries and steam. Batteries are bulky and have a limited charge life. Steam, on the other hand, is not cost effective nor user friendly (it gets extremely hot). When comparing compressed air with electricity however, electricity is more cost efficient. If this is true, why use compressed air? Watch this video, and read on to find out why you should use compressed air:

One of the most important reasons for using air compression instead of electricity is safety. In applications where equipment is overloaded, electrical equipment poses a safety hazard. Electrical shocks or fire may occur damaging property or injuring personnel. Compressed air and pneumatic tools can be used under many conditions, such as on wet floors or in high humidity areas.

Secondly, compressed air is more flexible. It is easier to use in remote areas like mines and construction sites. Air tools run cooler and have the advantage of variable speed and torque. Consider rock drills or similar impact type equipment. It would be nearly impossible to develop an equivalent force with electricity, especially in remote areas.

Tools powered by compressed air are also more lightweight. They can be manufactured with materials that make them lightweight and more ergonomic; thus balancing cost of air with cost of labor due to reduced worker fatigue when using these lighter tools.

Finally there’s the cost. The cost equivalent of compressed air can be as high as 7 to 8 times that of electricity. However, the equipment designed to use compressed air is lower in cost. Fewer parts are used due to the simplicity of design. Also, pneumatic tools are usually rugged and last longer in production environments.

Did you know compressed air is viewed as the fourth utility. Of course, we all probably use the first three in our daily lives: water, electricity and gas. However, due to its omnipresent use, compressed air is viewed as the fourth utility for small businesses and big enterprises alike.

Do you have an idea for our #expertcorner? Let us know!

Useful links:

Air Dryers

Book Your Compressor Service

Who we are and how Ash Air can help your business!

Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.We look after all things compressed air for your business!

• Reciprocating, Screw, air compressors
• Vacuum pumps
• Nitrogen
• An extensive line of air treatment components

Ash Air's range of Chicago Pneumatic, Alup, Pneumatech, and Quincy compressors are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world class compressors here in the land of the long white cloud.Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported by a 13 locations nationwide, Ash Air offers one of the widest selections of compressed air equipment and parts available today in New Zealand.

Reliability and Efficiency

With Ash Air compressors, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:

• Increasing uptime
• Reducing unexpected repairs
• Reducing energy consumption
• Improving the cleanliness of compressed air

Talk to the team today:  CONTACT US CONTACT US

Read more from our #expertcorner