What are Some Air Compressor Safety Tips to Watch For?

Air compressors are essential to your business, but they can also become a safety hazard when used improperly. Reading your owner’s manual and following all proper safety precautions before use is vital in keeping your compressor in great, working condition.

To help keep your air compressor in top shape, we put together a list of common safety precautions to aide in your regular maintenance schedule:

- Place your compressor in an ideal location that has clean, dry inlet air. Wet conditions can cause damage to your machine, as well as electrical issues.

- Do not use gas air compressors indoors.

- Perform a routine safety check before each use of your air compressor. Check hoses, ensure proper power supply, check oil level, etc.

- Always wear eye protection and hearing protection when operating your air compressor.

- Do not add or change the oil or fuel in your compressor while the unit is running or has recently been used. Your compressor could potentially catch fire while doing so.

- Make sure your unit is plugged into a properly grounded electrical outlet. If not, you could potentially damage the electrical panel of your compressor and also cause a fire.

- Use the proper extension cord for your unit if needed. A cord that is longer than necessary can cause loss of power or damage to the unit.

- Check your hose fittings to ensure they are tight. Loose fittings can hinder the performance of your compressor and/or cause damage.

-Make sure your shutoff valve is visible and within reach while using compressed air.

- Don’t allow cords or hoses to be exposed in floors, aisles or low-hanging areas. This could cause a trip hazard or injury if a hose whips.

- Never apply compressed air to your skin or directly at another person. Even air pressure as low as 15 PSI can cause serious injury.

- Do not use air directly from a compressor for breathing purposes unless the system has been designed specifically for breathing air.

- If you are using your own pressure vessel, only use those that are built to national or international standards.

- Never crimp, couple or uncouple pressurized hoses. Shut off the unit, valves and relieve any pressure before making or changing any hose connections.

This is not a complete list of safety procedures, as you should read your owner’s manual completely for all safety measures and proper operation of your machine. If you have any questions on safety issues or technical questions with your machine, please contact Technical Support.


Thank you to Chicago Pneumatic Compressors for this video.

Talk to the team today to see how we can help you minimise costs and maximise efficiency.

Contact Us

Ash Air is here for your business longevity!

Your business performance is what we strive for. Ash Air offers a full range of Chicago Pneumatic and Alup air compressors, tools and on-site solutions. We also provide oil-free compressors and food-grade oil to suit your needs. Ash Air are specialists in vacuum pumps, blowers, and medical gas solutions. Ash Air offers complete quality air solutions as well as advanced piping systems for the performance and efficiency of your compressed air system.

Do you have an idea for our #expertcorner? Let us know!

Useful links:

Book Your Compressor Service

Who we are and how Ash Air can help your business!

Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.We look after all things compressed air for your business!

  • Reciprocating, Screw, air compressors
  • Vacuum pumps
  • Nitrogen
  • An extensive line of air treatment components

Ash Air's range of Chicago Pneumatic, Alup, Pneumatech, and Quincy compressors are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world class compressors here in the land of the long white cloud.Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported by a 13 locations nationwide, Ash Air offers one of the widest selections of compressed air equipment and parts available today in New Zealand.

Reliability and Efficiency

With Ash Air compressors, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:

  • Increasing uptime
  • Reducing unexpected repairs
  • Reducing energy consumption
  • Improving the cleanliness of compressed air


Talk to the team today:  CONTACT US CONTACT US

Read more from our #expertcorner


Just like any other equipment, a compressed air installation also requires the necessary maintenance work during its entire lifespan. Even though maintenance costs are only about 5 to 10% of a machine's annual operating costs, failure to budget for maintenance can have potentially disastrous consequences. …


The air dyer is one of the most ignored cooler in the system. A dirty condenser will cause water in the lines, or worse it will cause complete dryer failure. …


Using nitrogen is not about fully replacing CO2, but it can reduce their consumption of CO2 by close to 70%. Using nitrogen is about sustainability. Creating your own nitrogen is easy and will reduce the use of a greenhouse gas, which is better for the environment. It will also save you money as early as month one adding that savings to your bottom line. …


A question that is occasionally asked by our customers to Ash Air is 'what is the cost of compressed air?'  This article looks at the product costs involved with compressed air, as well as minimising the energy cost of compressors and cost allocation. When looking at these factors, we need to realise what causes dropped efficiency of your compressor, leading to increased costs of compressed air. …


You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed.  …


Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. Failure to follow best practice can result in injuries, associated production downtime and decreased productivity. …


A common questions asked is why do I need an air dryer for my compressor? Typically, air compressors produce water, and although the water can be drained, there can still be aerosol and vapour droplets that are present. This is because water cannoet be compressed. Water can damage your compressor by corroding the valves, pipes and machinery controls, which will cost you time and money to resolve. In the long run, the cost of a new compressor is a small price to pay compared to the loss of production that could potentially arise due to water damage in your compressor.





…


Air compressors can fail for an assortment of different reasons: Normal wear and tear, lifespan and age of the unit, poor maintenance, power surge, install issues are just a few the come to mind. Check out this blog to find out our top 7 tips to ensure your compressor is looked after!  …


That cold, rainy, and in some places icey New Zealand winter is upon us, and with the following air compressor tips, your air system will be prepared with the preferred temperatures, despite the weather outside. Regardless of whether or not it actually snows or freezes up where you live, most winterisation service recommendations are also basic, solid maintenance procedures that will help extend the life and operational efficiencies of air compressors regardless of whether you live in Queenstown or Northland. …


If you're wondering what an air compressor actually is, you've come to the right place. Simply, air compressors convert power in to air that is pressurised which is then used to power air tools such as spray guns. Air compressors are used in a wide range of applications, so naturally if you want one that will be designed for spray painting your vehicle, you want a compressor specifically made for spray guns! This way your compressor will be able to provide the right amount of power to perform the job. …


Compressed air plays a fundamental role in industrial activities. Depending on the type of application, the energy cost of producing compressed air can be very high. Below are some tips to save on you compressor bill. …


Air Compressors are essential tools in a variety of industrial settings. No matter what industry you are in having a reliable air compressor can be a crucial part of getting the job done efficiently. However, like an investment, air compressors require upkeep and maintenance, and eventually will need to be upgraded. But how do you know when it’s time to upgrade your air compressor? Here are some things you need to consider. …


When it comes to laser cutting and other industrial processes, the choice of assist gas is crucial in achieving optimal results. Nitrogen and oxygen are commonly utilized as assist gases, each with its own unique properties and applications. Understanding the characteristics of both gases, will help you to make an informed decision to ensure precision, efficiency, and cost-effectiveness in your operations. …

Show More