Winery
Equipment Uncorked: What is Powered by Air
Proportioning the Compressed Air Dryer
Trying to figure out which air dryer capacity is best for you? Here are some factors to consider. Read More…
Why do Wineries Need Air Compressors?
Your passion is vinification, ours is air compressors.
Compressed air accounts for a large amount of energy consumption in the wine production process, especially in the production of grapes. A big part of wine-making is a result of the work of equipment and is dependent on its efficiency.
An air compressor should be located in well ventilated, shaded areas, out of direct sunlight. This includes the inlet for the compressed air system which should be located away from heat sources such as the compressed air outlet, refrigeration or air conditioning plant and equipment.
Winery
Equipment Uncorked: What is Powered by Air
Wineries of all sizes depend on compressed air for powering continuous-duty machines from crushing grapes to bottling, labeling and filling. These machines require a very precise amount of clean, oil-free air to accomplish the following items:
Pressing Grapes: Air compressors are often paired with a bladder press to aid in pushing out the grapes juice through the vent holes.
Crushing Grapes: Sadly, villagers do not stomp barefoot in vats to crush grape harvests anymore. Teaming up with a pressurized bladder, compressed air slowly inflates the tank to press the grapes to the surface.
Heat & Cool Product: Monitoring temperature and keeping best temperature ranges during fermentation is a very critical part of making a great wine. Excesses above or below the ideal range will have a direct impact on your finished wine, including whether or not it finishes at all
Filter & Dry Product: Running a filtration system, which is the fastest and most efficient way to filter your finished wine before bottling.
Aeration: Aeration is an essential process of introducing oxygen to the wine to round out and soften. Oil-free compressors are ideal because they don't risk contaminating your masterpiece with oil - affecting the quality and the taste.
Bottling: Bottling is one of the most common uses for air compressors in wineries and smaller commercial operations. Pressurized air is vital for moving wine from the conditioning tank or barrels to the bottle, and for keeping lines clean and free of water. Bottling uses a lot of air, so getting the right unit is critical. If you select an undersized or non-continuous rated unit, it will most likely get hot and start "spitting" oil into the lines. Even with a water trap, oil filters, and water filters, contamination will still get through pneumatic lines and wreak chaos on your equipment.
Clean Air = Clean Wine: No matter what size the operation, you will want an oil-free air compressor that is UL-listed, comes with an ASME-certified tank and uses the right combination of air treatment accessories to produce the most contaminant-free air possible. But, if you're still using an oil-lubricated compressor, you'll need to incorporate refrigerated dryers and in-line air filters to remove moisture, oil, and other airborne contaminants. Whether you are a large winery coop or an independent, small winery, choosing the right air compressor and accessories will go a long way to protect your investment and the award-winning wine you create.
Our Air Compressor Pro's are here to help you develop a complete compressed air solution, providing you with the best selection and pricing delivered right to your door. If you need help deciding which compressor is right for your winery, Ash Air has you covered.
Air Compressor Noise: Causes, Risks, & Solutions
Learn all about air compressors and the noise that goes along with them
Tips When Picking an Air Compressor:
As we wouldn't know which grapes to select for the perfect complex red, picking the right compressor for your winery can leave anyone unsure on such a big decision.
Here
are a few tips to keep in mind when comparing compressors:
1. Maintenance: Select an air compressor that is easy to maintain and to get into. Chicago Pneumatic compressors taking the guessing out of what to do. With detailed manuals to know what is required at each hour interval of your machine.
2. Replacement parts: Don't pick a machine that you have to track filters and parts down for. With a dedicated team (help@ashair.co.nz) it's simple to order parts and keep your machine always working at it's optimal performance.
3. Noise: Yes, noise is something to consider when selecting your compressor. No one needs a nagging employee complaining about the noise of a machine. Ask about the decibel chart and where the compressor ranks.
4. Installation: You need to be thinking about where this compressor is going to go. A quiet screw compressor should go inside and can be right beside your employees with minimal noise. Looking to put your compressor outside? Keep in mind, not all compressors are meant for outside. Weather is a huge component to harming your compressor, so make sure you ask if they have a "weather kit".
6. Drains: Compressed air produces moisture in your machine. Drains are essential to draining that moisture out of your machine. Make sure you ask where the drains are located, are they automatic and how often you should be manually draining.
The most energy demanding piece of equipment in a winery is often the air compressor.
Air compressors must be adequately sized for their application. Many businesses make the mistake of installing a compressor, larger than necessary in size, to allow for future expansion.Our suggestion is to install a compressor that will operate closer to peak capacity and add a back-up unit for periods of high demand. The back up compressor can be fitted with a variable speed control which reduces the speed at which the motor operates during periods of low demand.
Energy Efficiency: Considered a Variable-Speed Compressor
Not only can a VSD save energy, especially when used with rotary or screw compressors which are quite inefficient at low or partial load, but the compressor motor is also placed under less stress during start-ups and shut downs.
For smaller wineries that only use a single air compressor motor, the use of a VSD compressor can similarly reduce motor speed and deliver
significant savings of between 15 and 40%.
Explore Variable Speed Compressors
Do you have an idea for our #expertcorner? Let
us know!
Who we are and how Ash Air can help your business!
Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.We look after all things compressed air for your business!
- Rotary Screw and Piston Air Compressors
- Vacuum Pumps and Blowers
- Nitrogen Generation
- An extensive line of Air Treatment components
- AIRnet Piping System and Filtration
- Mobile Compressors, Generators, and Light Towers
Ash Air's range of Chicago Pneumatic, ALUP, Pneumatech, and Atlas Copco products are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world-class compressors here in the land of the long white cloud.Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported with nationwide coverage, Ash Air offers one of the widest selections of compressed air, vacuum pump, and industrial gas equipment and parts available today in New Zealand.
Reliability and Efficiency
With Ash Air, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:
- Increasing uptime
- Reducing unexpected repairs
- Reducing energy consumption and meeting our sustainability goals
- Improving the cleanliness of compressed air
Talk to the team today:
Read more from our #expertcorner
.jpeg)
Maintenance budget: 8 factors to consider
Just like any other equipment, a compressed air installation also requires the necessary maintenance work during its entire lifespan. Even though maintenance costs are only about 5 to 10% of a machine's annual operating costs, failure to budget for maintenance can have potentially disastrous consequences. Read More…
The air dyer is one of the most ignored cooler in the system. A dirty condenser will cause water in the lines, or worse it will cause complete dryer failure. Read More…
Why Replace CO2 with Nitrogen in your Brewery
Using nitrogen is not about fully replacing CO2, but it can reduce their consumption of CO2 by close to 70%. Using nitrogen is about sustainability. Creating your own nitrogen is easy and will reduce the use of a greenhouse gas, which is better for the environment. It will also save you money as early as month one adding that savings to your bottom line. Read More…
What do I need to know about ICONS?
ICONS: Intelligent Connectivity System: The insight into your compressed air system, wherever you are. Learn More about ICONS in this article here! Read More…
A question that is occasionally asked by our customers to Ash Air is 'what is the cost of compressed air?'Â This article looks at the product costs involved with compressed air, as well as minimising the energy cost of compressors and cost allocation. When looking at these factors, we need to realise what causes dropped efficiency of your compressor, leading to increased costs of compressed air. Read More…
How to avoid falling objects when working at heights
You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed. Read More…
Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. Failure to follow best practice can result in injuries, associated production downtime and decreased productivity. Read More…
Why do I need a dryer for my compressor?
A common questions asked is why do I need an air dryer for my compressor? Typically, air compressors produce water, and although the
water can be drained, there can still be aerosol and vapour droplets that are present. This is because water cannoet be compressed. Water
can damage your compressor by corroding the valves, pipes and machinery controls, which will cost you time and money to resolve. In
the long run, the cost of a new compressor is a small price to pay compared to the loss of production that could potentially arise due
to water damage in your compressor.
Read More…
What are some preventable causes of air compressor failure?
Air compressors can fail for an assortment of different reasons: Normal wear and tear, lifespan and age of the unit, poor maintenance, power surge, install issues are just a few the come to mind. Check out this blog to find out our top 7 tips to ensure your compressor is looked after! Read More…
.png)
Simple Ways to Reduce Your Compressed Air Costs?
Air compressors use considerable volumes of energy during a typical work cycle. When you add up all the expenses of operating a facility, any savings can help you boost your bottom line. Read More…
What Should You Know When Buying a Compressor for the First Time?
If you have never bought a rotary screw air compressor before; do the following. Add up the air consumption of all the equipment at your shop. That will be the amount of air your desired compressor should provide. Read More…
How to Know When Your Industrial Air Compressor Needs Servicing
Knowing the telltale signs of wear and tear, understanding your product’s specifications and usability guidelines, and knowing when it’s prudent to call in repairs are skills that could save you a lot of time, effort, and money in the long term. Read More…
One-stage vs Multi-stage Compressor
Find out the difference between a one-stage compressor and a multi-stage compressor. Read More…
How do I winterise my air compressor?
That cold, rainy, and in some places icey New Zealand winter is upon us, and with the following air compressor tips, your air system will be prepared with the preferred temperatures, despite the weather outside. Regardless of whether or not it actually snows or freezes up where you live, most winterisation service recommendations are also basic, solid maintenance procedures that will help extend the life and operational efficiencies of air compressors regardless of whether you live in Queenstown or Northland. Read More…
.png)
How to find the better desiccant dryer
The right desiccant dryer with quality desiccant will improve dryer performance and lifetime and will reduce energy and service costs. Read More…
How to Find the Best Air Compressor for Painting Cars
If you're wondering what an air compressor actually is, you've come to the right place. Simply, air compressors convert power in to air that is pressurised which is then used to power air tools such as spray guns. Air compressors are used in a wide range of applications, so naturally if you want one that will be designed for spray painting your vehicle, you want a compressor specifically made for spray guns! This way your compressor will be able to provide the right amount of power to perform the job. Read More…
How to Optimise Compressor Operating Costs
Compressed air plays a fundamental role in industrial activities. Depending on the type of application, the energy cost of producing compressed air can be very high. Below are some tips to save on you compressor bill. Read More…
Upgrading Your Compressor: When is the Right Time?
Air Compressors are essential tools in a variety of industrial settings. No matter what industry you are in having a reliable air compressor can be a crucial part of getting the job done efficiently. However, like an investment, air compressors require upkeep and maintenance, and eventually will need to be upgraded. But how do you know when it’s time to upgrade your air compressor? Here are some things you need to consider. Read More…
Choosing the right assist gas in laser cutting: nitrogen or oxygen
When it comes to laser cutting and other industrial processes, the choice of assist gas is crucial in achieving optimal results. Nitrogen and oxygen are commonly utilized as assist gases, each with its own unique properties and applications. Understanding the characteristics of both gases, will help you to make an informed decision to ensure precision, efficiency, and cost-effectiveness in your operations. Read More…
Controlling your nitrogen purity made easy
On-site nitrogen generators have many benefits over bottled gas. One is that they allow you to select your nitrogen purity. Here is how. Read More…
What are Mobile Compressors used for?
Mobile air compressors are portable, towable compressors particularly useful for applications that suit the construction and roading industry! You'll often see a mobile compressor being used for sandblasting, irrigation blow-outs, and for quarrying tools such as pneumatic block cutters and rock drills.  Read More…
Compressed air so portable it even reaches the moon.
Did you know that Chicago Pneumatic helped man land on the moon? Notice in this photo of the Apollo 11 landing what appear to be "soccer balls" on top of the capsule. They were inflated through a compressor specially developed by Chicago Pneumatic for NASA. Read More…
Where Should I Install my Air Dryer?
Your company purchased an air dryer for your compressor, now where should you install it? One of the most common things we see in the industry are air dryers being stored on top of the compressors. Seems like a wasted space not being used on top of the compressor, right? Wrong. Read More…
When using air compressors, there are many variables that are integral to the quality and effectiveness of your compressed air. When dryer air is necessary, being able to constantly and accurately monitor dew points can be a critical factor to your operation. Read More…
Why Does A Brewery Need Compressed Air?
Compressed air plays an integral role in breweries both large and small around the world. From start to finish, all details in the brewing process are managed in fine detail and having the right air compressor is no exception. Read More…
How is Nitrogen Used in the Coffee Industry?
We Kiwi's love our Coffee! Coffee, like all other food & beverage products, must go through a preservation process to keep the beans fresh during storage and packaging before they reach the consumer. Coffee that is not properly stored after it is roasted will lose a large amount of carbon dioxide, which lessens its' flavor and speeds up the staling process. One of the most common ways to preserve the freshness of coffee is the use of nitrogen gas. Learn more here: Read More…
How Can I Save on Energy Costs by Using a Screw Compressor?
Air compressors are helpful for an enormous range of applications such as air filling, packaging, tools, HVAC control, and more! One possible drawback is the amount of electricity they use; air compressors can be a huge drain on energy if used ​inefficiency... Read More…
Which material of pipes should I use for my Air Compressor System?
Air compressors create the energy used by pneumatic tools and processes throughout your compressed air system. The component that connects everything together is the piping. It is very important to choose the right compressed air pipe to avoid pressure loss, rust and other problems. Read More…
Why Do I Need a Back-up Air Compressor?
We get it, buying an air compressor is a big financial decision. And now we are suggesting that you need two air compressors, not just one. Ask yourself one question- Can your business still run if your air compressor goes down? Read More…
Keep It Down – Air Compressor Noise Reduction
It’s no secret – air compressors are excellent sources of energy. Not only do they power essential manufacturing elements and applications, but the heat generated as a result of the compressed air processes can be used as a byproduct that offsets other energy costs. However, there’s another form of energy that is also a consequence of the air compression process – sound. Read More…
How can I maximise the performance of my compressor?
Maintenance is key to continuing the performance of your air compressor. Continue to read about maximising the performance and longevity of your compressor and some air compressor maintenance tips! Read More…
When to use E-Stop on an air Compressor?
The emergency stop, "e-stop", is for true emergency situations only. When hitting the e-stop, all power is halted from the machine
and the unload process isn't achieved. The emergency stop button is intended to help with possibly hazardous situations that are developing.
Common conditions of having to use the e-stop is the misuse of the equipment in ways that weren’t intended, predictable failures not
addressed or failing to consider all the foreseeable uses of the compressor.
Read More…
