Our offices are closed from the 21st December until 6th January.

How to pick the right rotary screw compressor

When an industrial application calls for a steady supply of quality air, more and more users are turning to rotary screw compressors. Their efficiency, reliability and versatility make them a great choice in these cases. But there are countless applications and many different types of rotary screw air compressors. So which one is the right one for you?

First, let’s look at their benefits: In addition to the efficiency, reliability and versatility, rotary screw air compressors have many other advantages.

Their noise output is low and their physical footprint small. That means you can install them in more places.

Unlike piston compressors, they don’t need cool-down periods. This allows them to operate continuously around the clock - and they do not require a lot of maintenance.

In addition, oil-lubricated rotary screw compressors feature a low oil carry-over of as little as 3 ppm.

Finally, over their expected service life of 10 years or more, you don’t have to worry about a loss of capacity.

Fixed-speed and variable speed rotary screw compressors

The first major distinction is the one between fixed-speed and variable speed rotary screw air compressors. As the name indicates, the former run at a single speed. That makes them a great choice for applications with a steady air demand (and the more steady that demand, the more efficient they are).

Variable speed drive (VSD) compressors, on the other hand, adjust their motor speed to the amount of air that is needed. As a result, they can take their efficiency to another level if the compressed air demand fluctuates.

If that applies to you, you can learn more here about our VSD series.

This article primarily deals with the different types of fixed-speed rotary screw compressors. That means if your air demand is constant, you should read on for important information. 

Oil-free and oil-injected rotary screw compressors

Having narrowed your selection to fixed-speed compressors, the next step is to choose between oil-free or oil-injected models. 

The difference is that the latter introduces a new contaminant into the compression process. Therefore, you would pick an oil-free compressor if the presence of oil vapors matters – for example if your industry is subject to air purity standards. This includes the pharmaceutical industry, the food and beverage sector and semiconductor manufacturing.

Here, oil-free technology is a better alternative than using an oil-injected model and then filtering out the contaminant.

If air quality is less important, for example if you need the compressor to power pneumatic tools, then an oil-injected model will generally suffice.

Two drive types, lots of benefits

Atlas Copco offers its fixed-speed rotary screw compressors with two types of drives. Depending on your application, each of them has different advantages.

-Belt drive: Fixed-speed rotary screw compressors with belt drives are very robust. They are the least expensive and are easy to install, operate and maintain. For all of these reasons, they are a popular choice for smaller operations.

-Gear drive: A gear drive makes a compressor quieter. That means you can install it in more places without violating noise standards. Their initial investment cost is a little higher. However, because they are more efficient and maintenance free, rotary screw compressors with gears are less expensive to operate. This will allow you to quickly recoup that higher cost. 

Get in touch with one of our experts

Getting your compressor size right

No matter which type of compressor you choose, it is very important that you get its size right. If the unit is too small, it may not get the job done. If it is too large, you will waste a lot of valuable energy.

However, rotary screw compressors are a good deal with lots of benefits at any size.  Compared to piston air compressors, which are traditionally used by operations with a limited compressed air demand, they offer many advantages. First and foremost, they are more efficient, which reduces your costs and environmental footprint.

Because they can run around the clock, they can handle an increased demand better. Finally, fixed-speed rotary screw compressor lower the oil content in your compressed air system.

And the larger your compressor gets, the more you can save down the road. 

A complete offer

Ash Air offers a complete range of oil-injected fixed-speed compressors for different types of users with different priorities:

View 14 Products

Below 50HP - Screw Air Compressors

Chicago Pneumatic rotary screw air compressors are built on the very robust platform and feature state of the art controller and high-efficiency screw element.

The Ash Air range of oil lubricated screw air compressors are excellent all-in-one solutions for small and medium workshops, with energy cost savings of 30% - 35%. The most popular air compressors 10HP, 15HP, and 20HP are available as a full feature with integrated air dryer and receiver. More than 100 rotary air compressors available for sale from stock in Auckland and Christchurch.

Direct driven air compressors with variable speed drives offer high energy efficiency, a smooth start and prolonged life of the component parts, reduced system pressure and energy consumption.

Sub Categories

Fixed Speed below 50HP Variable Speed Drive below 50HP
View 15 Products

Above 50HP - Screw Air Compressors

For power above 45 kW we offer ALUP air compressors, designed and manufactured in Europe. We installed Alup rotary screw air compressors at dozens of sites in New Zealand for food processing, at timber plants and other industrial sites.

These high-efficiency rotary screw air compressors feature variable speed drives, remote monitoring and heat recovery options. ALUP air compressor is covered by an optional 5 years warranty.

The three most popular air compressors 45 kW, 55kW and 75 kW are available for sale from stock in Auckland. Chat to our experts, we will help you to answer questions about what can you use the compressor for, what compressor is the best and learn all about air compressor efficiency.

Sub Categories

Fixed Speed above 50HP Variable Speed Drive above 50HP
View 7 Products

Oil Free - Screw Air Compressors

The team at AshAir specialises in oil-free or oil-less scroll compressors with zero risk of oil contamination, and are ideal for critical applications including medical, pharmaceutical, dental, R&D, food & beverage, wine and brewery. Our 100% oil-less scroll compressors are designed with fewer moving parts, which means less wear and tear, less noise, higher efficiency and reliability, and a longer machine life .

These scroll compressors use cutting-edge scroll technology where the spirals never contact each other, and no lubrication is needed, making them completely oil-free. Our SPR 20 Multi oil-less scroll compressor operates with variable air delivery, controlled by an intelligent controller for air delivery supplied according to the fluctuation of air demand. This means a higher energy efficiency and more stable system pressure.

Sub Categories

ALUP Oil-Free Series - Screw Air Compressor spiralAIR Scroll Compressors wisAIR Oil-Free Screw Compressors


Do you have an idea for our #expertcorner? Let us know!

Useful links:

Book your Service here

Browse our Services here

Browse our Products here

Browse our News corner here

Browse our Sustainability focus here



Who we are and how Ash Air can help your business!

Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.We look after all things compressed air for your business!

  • Rotary Screw and Piston Air Compressors
  • Vacuum Pumps and Blowers
  • Nitrogen Generation
  • An extensive line of Air Treatment components
  • AIRnet Piping System and  Filtration
  • Mobile Compressors, Generators, and Light Towers

Ash Air's range of Chicago Pneumatic, ALUP, Pneumatech, and Atlas Copco products are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world-class compressors here in the land of the long white cloud.Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported with nationwide coverage, Ash Air offers one of the widest selections of compressed air, vacuum pump, and industrial gas equipment and parts available today in New Zealand.

Reliability and Efficiency

With Ash Air, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:

  • Increasing uptime
  • Reducing unexpected repairs
  • Reducing energy consumption and meeting our sustainability goals
  • Improving the cleanliness of compressed air


Talk to the team today:  CONTACT US CONTACT US

Read more from our #expertcorner


Just like any other equipment, a compressed air installation also requires the necessary maintenance work during its entire lifespan. Even though maintenance costs are only about 5 to 10% of a machine's annual operating costs, failure to budget for maintenance can have potentially disastrous consequences. …


The air dyer is one of the most ignored cooler in the system. A dirty condenser will cause water in the lines, or worse it will cause complete dryer failure. …


Using nitrogen is not about fully replacing CO2, but it can reduce their consumption of CO2 by close to 70%. Using nitrogen is about sustainability. Creating your own nitrogen is easy and will reduce the use of a greenhouse gas, which is better for the environment. It will also save you money as early as month one adding that savings to your bottom line. …


A question that is occasionally asked by our customers to Ash Air is 'what is the cost of compressed air?'  This article looks at the product costs involved with compressed air, as well as minimising the energy cost of compressors and cost allocation. When looking at these factors, we need to realise what causes dropped efficiency of your compressor, leading to increased costs of compressed air. …


You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed.  …


Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. Failure to follow best practice can result in injuries, associated production downtime and decreased productivity. …


A common questions asked is why do I need an air dryer for my compressor? Typically, air compressors produce water, and although the water can be drained, there can still be aerosol and vapour droplets that are present. This is because water cannoet be compressed. Water can damage your compressor by corroding the valves, pipes and machinery controls, which will cost you time and money to resolve. In the long run, the cost of a new compressor is a small price to pay compared to the loss of production that could potentially arise due to water damage in your compressor.





…


Air compressors can fail for an assortment of different reasons: Normal wear and tear, lifespan and age of the unit, poor maintenance, power surge, install issues are just a few the come to mind. Check out this blog to find out our top 7 tips to ensure your compressor is looked after!  …


That cold, rainy, and in some places icey New Zealand winter is upon us, and with the following air compressor tips, your air system will be prepared with the preferred temperatures, despite the weather outside. Regardless of whether or not it actually snows or freezes up where you live, most winterisation service recommendations are also basic, solid maintenance procedures that will help extend the life and operational efficiencies of air compressors regardless of whether you live in Queenstown or Northland. …


If you're wondering what an air compressor actually is, you've come to the right place. Simply, air compressors convert power in to air that is pressurised which is then used to power air tools such as spray guns. Air compressors are used in a wide range of applications, so naturally if you want one that will be designed for spray painting your vehicle, you want a compressor specifically made for spray guns! This way your compressor will be able to provide the right amount of power to perform the job. …


Compressed air plays a fundamental role in industrial activities. Depending on the type of application, the energy cost of producing compressed air can be very high. Below are some tips to save on you compressor bill. …


Air Compressors are essential tools in a variety of industrial settings. No matter what industry you are in having a reliable air compressor can be a crucial part of getting the job done efficiently. However, like an investment, air compressors require upkeep and maintenance, and eventually will need to be upgraded. But how do you know when it’s time to upgrade your air compressor? Here are some things you need to consider. …


When it comes to laser cutting and other industrial processes, the choice of assist gas is crucial in achieving optimal results. Nitrogen and oxygen are commonly utilized as assist gases, each with its own unique properties and applications. Understanding the characteristics of both gases, will help you to make an informed decision to ensure precision, efficiency, and cost-effectiveness in your operations. …


Mobile air compressors are portable, towable compressors particularly useful for applications that suit the construction and roading industry! You'll often see a mobile compressor being used for sandblasting, irrigation blow-outs, and for quarrying tools such as pneumatic block cutters and rock drills.   …


Did you know that Chicago Pneumatic helped man land on the moon? Notice in this photo of the Apollo 11 landing what appear to be "soccer balls" on top of the capsule. They were inflated through a compressor specially developed by Chicago Pneumatic for NASA. …


Your company purchased an air dryer for your compressor, now where should you install it? One of the most common things we see in the industry are air dryers being stored on top of the compressors. Seems like a wasted space not being used on top of the compressor, right? Wrong. …


When using air compressors, there are many variables that are integral to the quality and effectiveness of your compressed air. When dryer air is necessary, being able to constantly and accurately monitor dew points can be a critical factor to your operation. …


Compressed air plays an integral role in breweries both large and small around the world. From start to finish, all details in the brewing process are managed in fine detail and having the right air compressor is no exception. …


We Kiwi's love our Coffee! Coffee, like all other food & beverage products, must go through a preservation process to keep the beans fresh during storage and packaging before they reach the consumer. Coffee that is not properly stored after it is roasted will lose a large amount of carbon dioxide, which lessens its' flavor and speeds up the staling process. One of the most common ways to preserve the freshness of coffee is the use of nitrogen gas. Learn more here: …


Air compressors are helpful for an enormous range of applications such as air filling, packaging, tools, HVAC control, and more! One possible drawback is the amount of electricity they use; air compressors can be a huge drain on energy if used ​inefficiency...  …


We get it, buying an air compressor is a big financial decision. And now we are suggesting that you need two air compressors, not just one. Ask yourself one question- Can your business still run if your air compressor goes down? …


It’s no secret – air compressors are excellent sources of energy. Not only do they power essential manufacturing elements and applications, but the heat generated as a result of the compressed air processes can be used as a byproduct that offsets other energy costs. However, there’s another form of energy that is also a consequence of the air compression process – sound. …


The emergency stop, "e-stop", is for true emergency situations only. When hitting the e-stop, all power is halted from the machine and the unload process isn't achieved. The emergency stop button is intended to help with possibly hazardous situations that are developing. Common conditions of having to use the e-stop is the misuse of the equipment in ways that weren’t intended, predictable failures not addressed or failing to consider all the foreseeable uses of the compressor.
…

Show More