How to overcome 3 common challenges associated with working with stainless steel

Stainless steel has long been crucial for many applications where strength, durability, and resistance to corrosion are essential. That is why it is often chosen for process equipment used in harsh environments such as chemical and petrochemical plants, refineries, and power stations. Unluckily, from a metalworking perspective, the same qualities that make it perfect for heavy industries also mean that it can be a challenge to work with. Here we look at three issues stainless steel presents to material removal applications and share tips on how to overcome them. 

1. Stainless steel overheats

Compared to steel and other iron-based materials, stainless steel has a significantly lower heat conductivity. This means that it gets hotter locally when worked on, making many material-removal tasks, such as weld seam removal, difficult. 

How to minimize the risk of overheating when working with stainless steel?

The most effective way to minimize the risk of overheating is to select a low-speed tool. Tools running at less than 4000 rpm are a good choice, as the relatively low speed will not allow the material to heat up, enabling the work to continue undisturbed as long as needed. It is also important to pay attention to how the tool is handled and avoid pushing it against the metal too hard, as it can contribute to overheating and, in the worst case, melt the metal onto the abrasive.

2. Progress is slow

The parts being worked on are often very thin, and the material removal tasks run a high risk of damaging the product. To avoid this, the work needs to be carried out extremely carefully, which is time-consuming, and some tasks, like grinding, can slow down the entire production flow. 

How to speed up the process when working with stainless steel?

First of all, it is crucial to accept that with stainless steel, some tasks will take longer and take this into account when planning the work schedule. Selecting the right abrasive can also help speed up the process and contribute towards the best possible finish.

3. Achieving a quality finish is difficult

As stainless steel can be a demanding material to work with, achieving a good quality finish for painting is often a challenge, especially in an operating environment where other materials are being worked on simultaneously.

How to achieve a quality finish when working with stainless steel?

There are no shortcuts to a quality finish, and that is why it is essential to use the correct tools and inserts and eliminate any risk of damage from cross-contamination. The abrasive must be changed between using it on carbon steel and stainless steel, or the remains of the carbon steel will ultimately damage the stainless steel product. It is also useful to compare the options available and select the best possible insert for each task, as their features – and results – differ. For example, flap discs with finer grit can deliver a better finish in softer operations but make the process inefficient in other applications.

Browse our air compressor tools

View 5 Products

Grinders & Sanders

For maximum material removal with minimum effort and high-quality finish, Chicago Pneumatic delivers robust, durable and lightweight easy-to-handle tools.

Surface applications from heavy material removal to fine finishing. Tools designed to bring better comfort and increase your productivity. The range provides random orbital sanders, rotary sanders, pistol sander & polishers, and belt sanders. Secure payment, Afterpay, nationwide delivery. Buy now, pay layer.

View 4 Products

Percussive Tools & Drills

Their combination of power, compactness and light weight gets the job done. Better operator comfort comes with a unique vibration dampening body.
The range provides industrial chipping hammers, weld flux chippers, needle scalers, long reach scalers and rust & weld scalers.

With drilling capacity from 6mm (1/4”) to 50mm (2”), various speeds and power, our drills are designed to handle both your tough and smooth operations. The range provides straight, angle and pistol drills. Secure payment, Afterpay, nationwide delivery. Buy now, pay layer.

View 13 Products

Specialty & Cutting

The range provides saws, high speed cutters, nibblers, shears, engraving pens, riveters, caulking guns, air files, and blow guns. Secure payment, Afterpay, nationwide delivery. Buy now, pay layer.

Show More


Do you have an idea for our #expertcorner?Β Let us know!

Useful links:

Book Your Compressor Service



Who we are and how Ash Air can help your business!

Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.We look after all things compressed air for your business!

  • Reciprocating, Screw, air compressors
  • Vacuum pumps
  • Nitrogen
  • An extensive line of air treatment components

Ash Air's range of Chicago Pneumatic, Alup, Pneumatech, and Quincy compressors are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world class compressors here in the land of the long white cloud.Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported by a 13 locations nationwide, Ash Air offers one of the widest selections of compressed air equipment and parts available today in New Zealand.

Reliability and Efficiency

With Ash Air compressors, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:

  • Increasing uptime
  • Reducing unexpected repairs
  • Reducing energy consumption
  • Improving the cleanliness of compressed air


Talk to the team today:  CONTACT US CONTACT US

Read more from our #expertcorner


Just like any other equipment, a compressed air installation also requires the necessary maintenance work during its entire lifespan. Even though maintenance costs are only about 5 to 10% of a machine's annual operating costs, failure to budget for maintenance can have potentially disastrous consequences. …


The air dyer is one of the most ignored cooler in the system. A dirty condenser will cause water in the lines, or worse it will cause complete dryer failure. …


Using nitrogen is not about fully replacing CO2, but it can reduce their consumption of CO2 by close to 70%. Using nitrogen is about sustainability. Creating your own nitrogen is easy and will reduce the use of a greenhouse gas, which is better for the environment. It will also save you money as early as month one adding that savings to your bottom line. …


A question that is occasionally asked by our customers to Ash Air is 'what is the cost of compressed air?'Β  This article looks at the product costs involved with compressed air, as well as minimising the energy cost of compressors and cost allocation. When looking at these factors, we need to realise what causes dropped efficiency of your compressor, leading to increased costs of compressed air. …


You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed.Β  …


Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. Failure to follow best practice can result in injuries, associated production downtime and decreased productivity. …


A common questions asked is why do I need an air dryer for my compressor? Typically, air compressors produce water, and although the water can be drained, there can still be aerosol and vapour droplets that are present. This is because water cannoet be compressed. Water can damage your compressor by corroding the valves, pipes and machinery controls, which will cost you time and money to resolve. In the long run, the cost of a new compressor is a small price to pay compared to the loss of production that could potentially arise due to water damage in your compressor.





…


Air compressors can fail for an assortment of different reasons: Normal wear and tear, lifespan and age of the unit, poor maintenance, power surge, install issues are just a few the come to mind. Check out this blog to find out our top 7 tips to ensure your compressor is looked after!  …


That cold, rainy, and in some places icey New Zealand winter is upon us, and with the following air compressor tips, your air system will be prepared with the preferred temperatures, despite the weather outside. Regardless of whether or not it actually snows or freezes up where you live, most winterisation service recommendations are also basic, solid maintenance procedures that will help extend the life and operational efficiencies of air compressors regardless of whether you live in Queenstown or Northland. …


If you're wondering what an air compressor actually is, you've come to the right place. Simply, air compressors convert power in to air that is pressurised which is then used to power air tools such as spray guns. Air compressors are used in a wide range of applications, so naturally if you want one that will be designed for spray painting your vehicle, you want a compressor specifically made for spray guns! This way your compressor will be able to provide the right amount of power to perform the job. …


Compressed air plays a fundamental role in industrial activities. Depending on the type of application, the energy cost of producing compressed air can be very high. Below are some tips to save on you compressor bill. …


Air Compressors are essential tools in a variety of industrial settings. No matter what industry you are in having a reliable air compressor can be a crucial part of getting the job done efficiently. However, like an investment, air compressors require upkeep and maintenance, and eventually will need to be upgraded. But how do you know when it’s time to upgrade your air compressor? Here are some things you need to consider. …


When it comes to laser cutting and other industrial processes, the choice of assist gas is crucial in achieving optimal results. Nitrogen and oxygen are commonly utilized as assist gases, each with its own unique properties and applications. Understanding the characteristics of both gases, will help you to make an informed decision to ensure precision, efficiency, and cost-effectiveness in your operations. …


Mobile air compressors are portable, towable compressors particularly useful for applications that suit the construction and roading industry! You'll often see a mobile compressor being used for sandblasting, irrigation blow-outs, and for quarrying tools such as pneumatic block cutters and rock drills.Β Β  …


Did you know that Chicago Pneumatic helped man land on the moon? Notice in this photo of the Apollo 11 landing what appear to be "soccer balls" on top of the capsule. They were inflated through a compressor specially developed by Chicago Pneumatic for NASA. …


Your company purchased an air dryer for your compressor, now where should you install it? One of the most common things we see in the industry are air dryers being stored on top of the compressors. Seems like a wasted space not being used on top of the compressor, right? Wrong. …

Show More