The Cost of Compressed Air: What are the Lifetime Costs of a Compressor?

Whether you use your air compressor for woodcarving, bottling, manufacturing consumables, compressed air plays a critical role in your business.  It is undeniable that compressed air is valuable source to your applications. 

Below are a few examples illustrating just how much compressed air really is worth, and how you can get the most of it.

  1. Shutdown your system during non-production hours:  By leaving your system on, you’ll be wasting large amounts of compressed air.  Is your business only running on the weekdays?  Turn it off nights and weekends. Just like you turn the lights off when you leave the room, you should turn your machine off when you don’t need it. If you have leaks in your system, leaving a compressor running is only wasting energy, air and money.
  2. Compressed air is 8-times more expensive than electricity: It takes a large amount of energy to compress air and most of that energy disperses as heat. Do not waste that heat! With a heat recovery system, you will stretch your energy further and reclaim that heat.
  3. Keep Energy consumption cost in mind: Think the only expense with an air compressor is the cost of the machine- Think again.  Energy consumption is the largest factor on how much you spend on your air compressor.  Ensuring your machine is operating as efficiently as possible will ensure your energy costs are in check.
  4. Drop in pressure reduces energy consumption: Make sure you are using only the necessary pressure for your application. It can be enticing to assume that a higher pressure is better, but that is not necessarily the case.
  5. Reduced operating pressure also affects the leakage rate. The higher the pressure, the more air is forced out through small (or worse, large) leaks. Make sure your pressure is at the lowest possible operating pressure for your system and check your system for leaks monthly to keep operating costs as low as possible.

Compressed air is invaluable to many industrial processes, but without proper attention and maintenance, it can be costly. For questions, please contact us

Do you have an idea for our #expertcorner?Β Let us know!

Useful links:

Book Your Compressor Service



Who we are and how Ash Air can help your business!

Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.We look after all things compressed air for your business!

  • Reciprocating, Screw, air compressors
  • Vacuum pumps
  • Nitrogen
  • An extensive line of air treatment components

Ash Air's range of Chicago Pneumatic, Alup, Pneumatech, and Quincy compressors are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world class compressors here in the land of the long white cloud.Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported by a 13 locations nationwide, Ash Air offers one of the widest selections of compressed air equipment and parts available today in New Zealand.

Reliability and Efficiency

With Ash Air compressors, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:

  • Increasing uptime
  • Reducing unexpected repairs
  • Reducing energy consumption
  • Improving the cleanliness of compressed air


Talk to the team today:  CONTACT US CONTACT US

Read more from our #expertcorner


Just like any other equipment, a compressed air installation also requires the necessary maintenance work during its entire lifespan. Even though maintenance costs are only about 5 to 10% of a machine's annual operating costs, failure to budget for maintenance can have potentially disastrous consequences. …


The air dyer is one of the most ignored cooler in the system. A dirty condenser will cause water in the lines, or worse it will cause complete dryer failure. …


Using nitrogen is not about fully replacing CO2, but it can reduce their consumption of CO2 by close to 70%. Using nitrogen is about sustainability. Creating your own nitrogen is easy and will reduce the use of a greenhouse gas, which is better for the environment. It will also save you money as early as month one adding that savings to your bottom line. …


A question that is occasionally asked by our customers to Ash Air is 'what is the cost of compressed air?'Β  This article looks at the product costs involved with compressed air, as well as minimising the energy cost of compressors and cost allocation. When looking at these factors, we need to realise what causes dropped efficiency of your compressor, leading to increased costs of compressed air. …


You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed.Β  …


Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. Failure to follow best practice can result in injuries, associated production downtime and decreased productivity. …


A common questions asked is why do I need an air dryer for my compressor? Typically, air compressors produce water, and although the water can be drained, there can still be aerosol and vapour droplets that are present. This is because water cannoet be compressed. Water can damage your compressor by corroding the valves, pipes and machinery controls, which will cost you time and money to resolve. In the long run, the cost of a new compressor is a small price to pay compared to the loss of production that could potentially arise due to water damage in your compressor.





…

Show More