Luck of the Irish and Compressed Air Give Us Beer

With the Luck of the Irish and a little help from air compressors we will all be enjoying a pint of our favorite beer on St. Patrick’s Day.

St. Patrick’s Day, started on March 17, 1631 when the Church established a Feast Day honoring St. Patrick, the Patron Saint of Ireland.

Modern St. Patrick’s Day celebrations, at least in New Zealand, are less to do with the historical figure of the saint and more to do with corned beef and cabbage and green beer. And lucky for us, air compressors assist in bringing us both.

Compressed air is essential in the beer making process. It is used in almost every stage of the brewing process including:

Bottling/Canning – to get beer in the bottles and cans we buy - compressed air is used to move beer from the conditioning tank to the bottle. It is also used for keeping the lines clean. Class 0 oil-free air will make sure the lines and tanks do not get polluted in the process.

CO2 Recovery – one option is to recover the CO2 that is created during the fermentation process and either use it to carbonate your products or by storing it and later selling it.

Cleaning air – Oil-free compressed air is used for cleaning bottles and packaging prior to the filling. It is important the air is clean, if the air is contaminated it can alter the flavor, odor and foam as well as being a health hazard.

Fermentation – during the fermentation process, Compressed air supplies oxygen to bacteria. This converts carbon hydrates to alcohol using micro-organisms. It is extremely important to deliver the exact amount of compressed air and maintaining the correct oxygen level to determine the quality of yeast.

Packaging/labeling – Compressed air is used to control the valves and actuators in automated lines for packaging, labelling and more.

Wastewater treatment – Water used during the brewing process must be treated before it can be returned to the water cycle to minimize its impact on the environment. The air needed for this treatment must be oil-free of the water would be contaminated again.

So, we hope on St. Patrick’s Day, that you raised your favorite pint with your friends honoring St. Patrick, remember compressed air played in your day. Sláinte!

If you are interested in learning more about how compressed air can be used in the brewing process, reach out to an expert today. 

Browse Ash Air's Oil-Free compressors

View 2 Products

ALUP Oil-Free Series - Screw Air Compressor

ALUP OF range brings you outstanding sustainability, reliability and performance, while minimizing the total cost of ownership. Built to perform even in the harshest environments, these compressors keep your production running efficiently.

Class Zero Oil-Free: some applications require absolutely, unquestionably clean air. That is why the ALUP OF delivers air that is certified to be 100% free of any traces of oil, aerosols or other contaminants.

Why Efficiency Matters?
Energy costs represent about 70% of the total operating cost of your compressor over a 5-year period. Therefore, reducing the energy consumption of your compressed air installation should be a major focus to ensure the lowest cost of ownership

View 3 Products

spiralAIR Scroll Compressors

Our 100% oil-free spiralAIR scroll compressor provide high-quality compressed air for critical applications in wide range of industries such as pharmaceuticals, food and beverage, electronics and textiles that cannot risk any chance of oil contamination in their processes.

SpiralAIR SPR oil-free scroll compressors comply with ISO 8573-1 CLASS 0 (2010) certification, providing 100% oil-free air for critical applications such as medical, pharmaceutical, dental, food & beverage, wine and brewery.

SpiralAIR scroll compressors are designed with fewer moving parts, which means less wear and tear, less noise, higher efficiency, higher reliability and longer machine life.

View 2 Products

wisAIR Oil-Free Screw Compressors

100% oil-free water injected screw compressor provide high-quality compressed air for critical applications in a wide range of industries such as pharmaceuticals, food and beverage, electronics and textiles that cannot risk any chance of oil contamination in their processed. Range from 20-75hp.

WisAIR is 100% oil-free clean air integrated with an air dryer that enhances the air quality and protects your air network against corrosion. The low air discharge temperatures, optimised rotor profiles and no bearing losses makes the machine the most energy efficient compressor. Its intergrated inverter technology assures a perfect match of air supply and air demand eliminating no load power losses. WisAIR is made of durable material to exclude any risk of corrosion thus making it a reliable product.



Do you have an idea for our #expertcorner? Let us know!

Useful links:

Book Your Compressor Service



Who we are and how Ash Air can help your business!

Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.We look after all things compressed air for your business!

  • Reciprocating, Screw, air compressors
  • Vacuum pumps
  • Nitrogen
  • An extensive line of air treatment components

Ash Air's range of Chicago Pneumatic, Alup, Pneumatech, and Quincy compressors are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world class compressors here in the land of the long white cloud.Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported by a 13 locations nationwide, Ash Air offers one of the widest selections of compressed air equipment and parts available today in New Zealand.

Reliability and Efficiency

With Ash Air compressors, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:

  • Increasing uptime
  • Reducing unexpected repairs
  • Reducing energy consumption
  • Improving the cleanliness of compressed air


Talk to the team today:  CONTACT US CONTACT US

Read more from our #expertcorner


Just like any other equipment, a compressed air installation also requires the necessary maintenance work during its entire lifespan. Even though maintenance costs are only about 5 to 10% of a machine's annual operating costs, failure to budget for maintenance can have potentially disastrous consequences. …


The air dyer is one of the most ignored cooler in the system. A dirty condenser will cause water in the lines, or worse it will cause complete dryer failure. …


Using nitrogen is not about fully replacing CO2, but it can reduce their consumption of CO2 by close to 70%. Using nitrogen is about sustainability. Creating your own nitrogen is easy and will reduce the use of a greenhouse gas, which is better for the environment. It will also save you money as early as month one adding that savings to your bottom line. …


A question that is occasionally asked by our customers to Ash Air is 'what is the cost of compressed air?'  This article looks at the product costs involved with compressed air, as well as minimising the energy cost of compressors and cost allocation. When looking at these factors, we need to realise what causes dropped efficiency of your compressor, leading to increased costs of compressed air. …


You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed.  …


Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. Failure to follow best practice can result in injuries, associated production downtime and decreased productivity. …


A common questions asked is why do I need an air dryer for my compressor? Typically, air compressors produce water, and although the water can be drained, there can still be aerosol and vapour droplets that are present. This is because water cannoet be compressed. Water can damage your compressor by corroding the valves, pipes and machinery controls, which will cost you time and money to resolve. In the long run, the cost of a new compressor is a small price to pay compared to the loss of production that could potentially arise due to water damage in your compressor.





…


Air compressors can fail for an assortment of different reasons: Normal wear and tear, lifespan and age of the unit, poor maintenance, power surge, install issues are just a few the come to mind. Check out this blog to find out our top 7 tips to ensure your compressor is looked after!  …


That cold, rainy, and in some places icey New Zealand winter is upon us, and with the following air compressor tips, your air system will be prepared with the preferred temperatures, despite the weather outside. Regardless of whether or not it actually snows or freezes up where you live, most winterisation service recommendations are also basic, solid maintenance procedures that will help extend the life and operational efficiencies of air compressors regardless of whether you live in Queenstown or Northland. …


If you're wondering what an air compressor actually is, you've come to the right place. Simply, air compressors convert power in to air that is pressurised which is then used to power air tools such as spray guns. Air compressors are used in a wide range of applications, so naturally if you want one that will be designed for spray painting your vehicle, you want a compressor specifically made for spray guns! This way your compressor will be able to provide the right amount of power to perform the job. …


Compressed air plays a fundamental role in industrial activities. Depending on the type of application, the energy cost of producing compressed air can be very high. Below are some tips to save on you compressor bill. …


Air Compressors are essential tools in a variety of industrial settings. No matter what industry you are in having a reliable air compressor can be a crucial part of getting the job done efficiently. However, like an investment, air compressors require upkeep and maintenance, and eventually will need to be upgraded. But how do you know when it’s time to upgrade your air compressor? Here are some things you need to consider. …


When it comes to laser cutting and other industrial processes, the choice of assist gas is crucial in achieving optimal results. Nitrogen and oxygen are commonly utilized as assist gases, each with its own unique properties and applications. Understanding the characteristics of both gases, will help you to make an informed decision to ensure precision, efficiency, and cost-effectiveness in your operations. …


Mobile air compressors are portable, towable compressors particularly useful for applications that suit the construction and roading industry! You'll often see a mobile compressor being used for sandblasting, irrigation blow-outs, and for quarrying tools such as pneumatic block cutters and rock drills.   …


Did you know that Chicago Pneumatic helped man land on the moon? Notice in this photo of the Apollo 11 landing what appear to be "soccer balls" on top of the capsule. They were inflated through a compressor specially developed by Chicago Pneumatic for NASA. …


Your company purchased an air dryer for your compressor, now where should you install it? One of the most common things we see in the industry are air dryers being stored on top of the compressors. Seems like a wasted space not being used on top of the compressor, right? Wrong. …


When using air compressors, there are many variables that are integral to the quality and effectiveness of your compressed air. When dryer air is necessary, being able to constantly and accurately monitor dew points can be a critical factor to your operation. …


Compressed air plays an integral role in breweries both large and small around the world. From start to finish, all details in the brewing process are managed in fine detail and having the right air compressor is no exception. …


We Kiwi's love our Coffee! Coffee, like all other food & beverage products, must go through a preservation process to keep the beans fresh during storage and packaging before they reach the consumer. Coffee that is not properly stored after it is roasted will lose a large amount of carbon dioxide, which lessens its' flavor and speeds up the staling process. One of the most common ways to preserve the freshness of coffee is the use of nitrogen gas. Learn more here: …

Show More