Why are compressed air dryers so important?

There are many contaminants that can threaten your compressed air system, but moisture is among the most prevalent. You may be thinking, but it’s just water, but water can have a devastating impact on your compressed air system, your production equipment, and your end product. The best way to prevent moisture from contaminating your compressed air is with a dryer.

Moisture in your compressed air is inevitable as ambient air always contains moisture. When air is compressed, it is pressed into a more compact space. As a result, the contaminants it contains, including moisture can be found in higher volume.

So why is moisture a problem?

Corrosion

It all starts with your compressed air system itself, where the moisture can cause your equipment to corrode if your air is untreated (or improperly treated). This can reduce reliability and durability of your compressed air equipment and shorten time between maintenance.

Corrosion is a problem that magnifies downstream, for an example, rust particles from corroded pipes get into your compressed air and can harm the equipment that uses this air. It can also make it all the way into your end products and compromise their quality.

Microorganisms

Moisture creates ideal conditions for microorganisms to grow, such as fungi, mold, and bacteria. These living organisms multiply in the hot and humid environments that are present in compressed air systems.

These microorganisms do not just pose a danger to your compressed air system itself, but an even greater threat to your end products. This is especially true when your end product is consumed by customers, such as food, beverage, or pharmaceuticals.

Types of dryers

Dyers are your most important line of defense against moisture in your compressed air. The right technology can effectively safeguard your system and end products, and therefore save you a lot of hassle and costs.

Refrigerated dryers

Refrigerant dryers are the most common type of dryer. They consist of an air-to-air heat exchanger and an air-to-refrigerant heat exchanger. They remove moisture from your compressed air through condensation.

Desiccant dryers

A desiccant is a material that adsorbs moisture. One of the best-known desiccants is the silica gel contained in the small pouches included in the packaging of products to keep them dry. Also referred to as a hygroscopic material, desiccant is used in dryers to adsorb the moisture contained in the compressed air. The air flows over the material, gives off its moisture and is thereby dried.

Membrane dryers

These dryers are quiet, are easy to operate, have no moving parts, consume little power, and require minimal service. 

They use a process called “selective permeation” of the gas components the air contains. The dryer consists of a cylinder that houses thousands of tiny hollow polymer fibers with an inner coating. Using their selective permeability, these fibers remove water vapor.


Sourced from https://www.thecompressedairblog.com/

Browse air dryers at Ash Air

View 3 Products

Refrigerated Air Dryers

Ash Air has a range of quality cycling and non-cycling Pneumatech refrigerated dryers for your air compressors.Our non-cycling Pneumatech refrigerated dryers offer a reliable and economic solution for removing moisture from your compressed air system. These refrigerated dryers for air compressors are easy to install, offer energy savings, prevent pressure losses, are equipped with rotary compressors and R410A refrigerant, and have improved connectivity features.

The Ash Air collection of very dependable cycling Pneumatech refrigerated dryers offer easy-to-use controllers, are easy to install with low maintenance needs, and are energy efficient with zero-loss drains.

We also supply a range of superior performance refrigerated dryers for air compressors with variable speed technology that matches energy consumption to the actual compressed air demand, have stable pressure dew points, and are available with both air-cooled and water-cooled condensers.

View 5 Products

Desiccant Air Dryers

Our innovative desiccant dryers give customers efficient protection against the presence of any humidity in the air, which often is the source of pipe corrosion and decreased efficiency of equipment and tools.

The Ash Air range of advanced technology 360-1080 m3/hr and 1188-10800 m3/hr adsorption air dryers are for customers who have a focus on energy efficiency and low operating costs, while maintaining the highest standards in air purity. Our Pneumatech blower purge air dryers use heated blower purge air to remove moisture from the desiccant material, which means no purge loss during regeneration.

View 1 Products

Breathing Air Dryers

Here at Ash Air, we offer BA 15-310 HE Breathing Air Purifiers. The Pneumatech solution for Industrial Breathing Air applications, build to exceed standards. The Breathing Air Dryer range assures safe working environment in a wide range of applications. Built to exceed standards, Breathing Air Dryers provide certified breathing air, even in situations with polluted intake air to ensure personnel safety at all times.

The Pneumatech solution for Industrial Breathing Air applications, build to exceed standards. The Breathing Air Dryer range assures safe working environment in a wide range of applications. Built to exceed standards, Breathing Air Dryers provide certified breathing air, even in situations with polluted intake air to ensure personnel safety at all times.

Do you have an idea for our #expertcorner? Let us know!

Useful links:

Book Your Compressor Service

Who we are and how Ash Air can help your business!

Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.We look after all things compressed air for your business!

  • Reciprocating, Screw, air compressors
  • Vacuum pumps
  • Nitrogen
  • An extensive line of air treatment components

Ash Air's range of Chicago Pneumatic, Alup, Pneumatech, and Quincy compressors are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world class compressors here in the land of the long white cloud.Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported by a 13 locations nationwide, Ash Air offers one of the widest selections of compressed air equipment and parts available today in New Zealand.

Reliability and Efficiency

With Ash Air compressors, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:

  • Increasing uptime
  • Reducing unexpected repairs
  • Reducing energy consumption
  • Improving the cleanliness of compressed air


Talk to the team today:  CONTACT US CONTACT US

Read more from our #expertcorner


Just like any other equipment, a compressed air installation also requires the necessary maintenance work during its entire lifespan. Even though maintenance costs are only about 5 to 10% of a machine's annual operating costs, failure to budget for maintenance can have potentially disastrous consequences. …


The air dyer is one of the most ignored cooler in the system. A dirty condenser will cause water in the lines, or worse it will cause complete dryer failure. …


Using nitrogen is not about fully replacing CO2, but it can reduce their consumption of CO2 by close to 70%. Using nitrogen is about sustainability. Creating your own nitrogen is easy and will reduce the use of a greenhouse gas, which is better for the environment. It will also save you money as early as month one adding that savings to your bottom line. …


A question that is occasionally asked by our customers to Ash Air is 'what is the cost of compressed air?'  This article looks at the product costs involved with compressed air, as well as minimising the energy cost of compressors and cost allocation. When looking at these factors, we need to realise what causes dropped efficiency of your compressor, leading to increased costs of compressed air. …


You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed.  …


Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. Failure to follow best practice can result in injuries, associated production downtime and decreased productivity. …


A common questions asked is why do I need an air dryer for my compressor? Typically, air compressors produce water, and although the water can be drained, there can still be aerosol and vapour droplets that are present. This is because water cannoet be compressed. Water can damage your compressor by corroding the valves, pipes and machinery controls, which will cost you time and money to resolve. In the long run, the cost of a new compressor is a small price to pay compared to the loss of production that could potentially arise due to water damage in your compressor.





…


Air compressors can fail for an assortment of different reasons: Normal wear and tear, lifespan and age of the unit, poor maintenance, power surge, install issues are just a few the come to mind. Check out this blog to find out our top 7 tips to ensure your compressor is looked after!  …


That cold, rainy, and in some places icey New Zealand winter is upon us, and with the following air compressor tips, your air system will be prepared with the preferred temperatures, despite the weather outside. Regardless of whether or not it actually snows or freezes up where you live, most winterisation service recommendations are also basic, solid maintenance procedures that will help extend the life and operational efficiencies of air compressors regardless of whether you live in Queenstown or Northland. …


If you're wondering what an air compressor actually is, you've come to the right place. Simply, air compressors convert power in to air that is pressurised which is then used to power air tools such as spray guns. Air compressors are used in a wide range of applications, so naturally if you want one that will be designed for spray painting your vehicle, you want a compressor specifically made for spray guns! This way your compressor will be able to provide the right amount of power to perform the job. …


Compressed air plays a fundamental role in industrial activities. Depending on the type of application, the energy cost of producing compressed air can be very high. Below are some tips to save on you compressor bill. …


Air Compressors are essential tools in a variety of industrial settings. No matter what industry you are in having a reliable air compressor can be a crucial part of getting the job done efficiently. However, like an investment, air compressors require upkeep and maintenance, and eventually will need to be upgraded. But how do you know when it’s time to upgrade your air compressor? Here are some things you need to consider. …


When it comes to laser cutting and other industrial processes, the choice of assist gas is crucial in achieving optimal results. Nitrogen and oxygen are commonly utilized as assist gases, each with its own unique properties and applications. Understanding the characteristics of both gases, will help you to make an informed decision to ensure precision, efficiency, and cost-effectiveness in your operations. …


Mobile air compressors are portable, towable compressors particularly useful for applications that suit the construction and roading industry! You'll often see a mobile compressor being used for sandblasting, irrigation blow-outs, and for quarrying tools such as pneumatic block cutters and rock drills.   …


Did you know that Chicago Pneumatic helped man land on the moon? Notice in this photo of the Apollo 11 landing what appear to be "soccer balls" on top of the capsule. They were inflated through a compressor specially developed by Chicago Pneumatic for NASA. …


Your company purchased an air dryer for your compressor, now where should you install it? One of the most common things we see in the industry are air dryers being stored on top of the compressors. Seems like a wasted space not being used on top of the compressor, right? Wrong. …


When using air compressors, there are many variables that are integral to the quality and effectiveness of your compressed air. When dryer air is necessary, being able to constantly and accurately monitor dew points can be a critical factor to your operation. …


Compressed air plays an integral role in breweries both large and small around the world. From start to finish, all details in the brewing process are managed in fine detail and having the right air compressor is no exception. …


We Kiwi's love our Coffee! Coffee, like all other food & beverage products, must go through a preservation process to keep the beans fresh during storage and packaging before they reach the consumer. Coffee that is not properly stored after it is roasted will lose a large amount of carbon dioxide, which lessens its' flavor and speeds up the staling process. One of the most common ways to preserve the freshness of coffee is the use of nitrogen gas. Learn more here: …


Air compressors are helpful for an enormous range of applications such as air filling, packaging, tools, HVAC control, and more! One possible drawback is the amount of electricity they use; air compressors can be a huge drain on energy if used ​inefficiency...  …


We get it, buying an air compressor is a big financial decision. And now we are suggesting that you need two air compressors, not just one. Ask yourself one question- Can your business still run if your air compressor goes down? …

Show More