Our offices are closed from the 21st December until 6th January.

3 Reasons to Use an FRL

FRLs – Filters, Regulators and Lubricators – guarantee the efficiency and durability of pneumatic tools. Including an FRL in your air system is vital to running an efficient air line set-up and key to achieving a good return on investment. Adding an FRL in close proximity to the power tool will ensure the required airflow pressure, as well as good air quality by reducing the risk of moisture and dust in the air line. The FRL also helps maintain your air line by providing lubrication.

How to achieve ultimate pneumatic tool performance by optimizing air line installation



An FRL system combines 3 main functions in one system: filtration, regulation and lubrication.

1. Air filtration: The filter cleans compressed air and traps solid particles (dust, dirt, rust).

Dust in an engine could block the air flow and reduce the power of the tool leading to increased maintenance costs as well as high air consumption. Any dirt and rust could also damage the engine resulting in power loss and early wear. This increases tool repair costs and the risk of incident during production.

2. Air regulation: The regulator ensures the consistency of the dynamic working pressure at 90 psi/6.3 bar.

This is important because if the pressure is lower than the one recommended by the manufacturer, the tool can’t reach its performance level and the profitability is decreasing. If the pressure is too high, the tool wears out early. It could also breakdown leading to operator injury and a risk of damage to the application.

3. Air lubrication: The lubricator adds controlled quantities of oil into a compressed air system.

Without lubrication a tool wears out and will stop reaching its maximum level of performance. This in turn leads to a loss of productivity and increased maintenance costs. The graphics below illustrate the durability and the service life of the tool’s air motor with and without lubrication maintenance:

Achieve optimum performance of your tool’s air motor with good lubrication:




Estimated figures based on laboratory tests carried out on pneumatic motors.
(1) Tool’s motor power output
(2) Oil quantity
(3) Tool manufacturer recommendations (available in operator/product manual)


Achieve optimum service life of your tool’s air motor with good air lubrication:


Estimated figures based on laboratory tests carried out on pneumatic motors. 
(1) Tool’s motor power output 
(2) Oil quantity 
(3) Tool manufacturer recommendations (available in operator/product manual)


4 things to consider to select the appropriate FRL unit

There are many different types of FRLs, and so when specifying an FRL there are 4 key considerations:

  1. Environment 
  2. Type of FRL 
  3. Thread size
  4. Tool’s air flow requirements

Important: Make sure you always check manufacturer recommendations.


How to install FRLs



Most pneumatic tool users do not achieve the best performance from their tools because of the air line setup.

To maximize the benefits of using FRLs there are 4 rules to bear in mind:

  1. Always use one FRL unit per tool to ensure the best performance. If more than one tool in use is connected to the same FRL unit, the air pressure and lubrication will be diluted between the different air tools, and you will not benefit from the regulator function.
  2. Mount the FRL units as close as possible to the tool – where the tool hose is connected to the system – to ensure that the oil reaches the tool and to avoid losing pressure.
  3. Always make sure that the lubricator is topped up with oil before using the tool since lubrication maximizes the life of your tool. Read more about oil quantity in our Technical guide “Is your air tool installation right?”
  4. Make sure you maintain the inlet filters regularly: they should be free from moisture and dirt.


Safety Tips

Pneumatic tools are designed and specified to work at 90 PSI (6.3 bar) dynamic air pressure and with lubrication (find all information in the tools’ operator manuals available in the Chicago Pneumatic website). A higher pressure could affect the tools lifespan, and operator safety (excessive vibration, or abrasive over-speed and burst risk). We recommend using a gauge equipped FRL with every tool to adjust pressure.



Links

Air Filters

Air Accessories - Filters, Regulators & Lubricators in our Online Shop



Who we are and how we can help!

Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.

We look after all things compressed air for your business!

Ash Air's range of Chicago Pneumatic, Alup, Pneumatech, and Quincy compressors are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world class compressors here in the land of the long white cloud.

Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported by a 13 locations nationwide, Ash Air offers one of the widest selections of compressed air equipment and parts available today in New Zealand.

Reliability and Efficiency

With Ash Air compressors, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:

Extensive Product Line

We offer a broad array of products, from world class compressor brands, including a full range of rotary and reciprocating air compressors from ½ to 200 horsepower. We serve the compressed air needs of many industries such as the following:

Solutions

In our effort to prioritise the needs of our customers, we work hard to provide solutions. We continually introduce innovative products here at Ash Air to our Kiwi customers, so our end users can rely on us to meet evolving compressed air needs.

Support

We offer an extensive array of air compressor parts and services through our direct locations throughout New Zealand. Continued growth means our operations continue to operate on a national level.

In our effort to provide the best possible support, we offer the following remote monitoring, preventative maintenance, vacuum pump services and overhaul, compressor and pipework installations, hire fleet and leasing solutions, leak detection's and energy audits, and breakdown recovery and emergency air.

When considering new energy-efficient air compressors or an upgrade to more energy-efficient machinery, Ash Air can help you make the right choices for your business.


Read more from #expert corner!


Just like any other equipment, a compressed air installation also requires the necessary maintenance work during its entire lifespan. Even though maintenance costs are only about 5 to 10% of a machine's annual operating costs, failure to budget for maintenance can have potentially disastrous consequences. …


The air dyer is one of the most ignored cooler in the system. A dirty condenser will cause water in the lines, or worse it will cause complete dryer failure. …


Using nitrogen is not about fully replacing CO2, but it can reduce their consumption of CO2 by close to 70%. Using nitrogen is about sustainability. Creating your own nitrogen is easy and will reduce the use of a greenhouse gas, which is better for the environment. It will also save you money as early as month one adding that savings to your bottom line. …


A question that is occasionally asked by our customers to Ash Air is 'what is the cost of compressed air?'  This article looks at the product costs involved with compressed air, as well as minimising the energy cost of compressors and cost allocation. When looking at these factors, we need to realise what causes dropped efficiency of your compressor, leading to increased costs of compressed air. …


You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed.  …


Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. Failure to follow best practice can result in injuries, associated production downtime and decreased productivity. …


A common questions asked is why do I need an air dryer for my compressor? Typically, air compressors produce water, and although the water can be drained, there can still be aerosol and vapour droplets that are present. This is because water cannoet be compressed. Water can damage your compressor by corroding the valves, pipes and machinery controls, which will cost you time and money to resolve. In the long run, the cost of a new compressor is a small price to pay compared to the loss of production that could potentially arise due to water damage in your compressor.





…


Air compressors can fail for an assortment of different reasons: Normal wear and tear, lifespan and age of the unit, poor maintenance, power surge, install issues are just a few the come to mind. Check out this blog to find out our top 7 tips to ensure your compressor is looked after!  …


That cold, rainy, and in some places icey New Zealand winter is upon us, and with the following air compressor tips, your air system will be prepared with the preferred temperatures, despite the weather outside. Regardless of whether or not it actually snows or freezes up where you live, most winterisation service recommendations are also basic, solid maintenance procedures that will help extend the life and operational efficiencies of air compressors regardless of whether you live in Queenstown or Northland. …

Show More