Ash Air

Proportioning the Compressed Air Dryer

Trying to figure out which air dryer capacity is best for you? Here are some factors to consider.

Maintenance budget: 8 factors to consider

Just like any other equipment, a compressed air installation also requires the necessary maintenance work during its entire lifespan. Even though maintenance costs are only about 5 to 10% of a machine's annual operating costs, failure to budget for maintenance can have potentially disastrous consequences.

Read More

How to Clean Your Coils?

The air dyer is one of the most ignored cooler in the system. A dirty condenser will cause water in the lines, or worse it will cause complete dryer failure.

Read More

Why Replace CO2 with Nitrogen in your Brewery

Using nitrogen is not about fully replacing CO2, but it can reduce their consumption of CO2 by close to 70%. Using nitrogen is about sustainability. Creating your own nitrogen is easy and will reduce the use of a greenhouse gas, which is better for the environment. It will also save you money as early as month one adding that savings to your bottom line.

Read More

What do I need to know about ICONS?

ICONS: Intelligent Connectivity System: The insight into your compressed air system, wherever you are. Learn More about ICONS in this article here!

Read More

The Cost of Compressed Air

A question that is occasionally asked by our customers to Ash Air is 'what is the cost of compressed air?' This article looks at the product costs involved with compressed air, as well as minimising the energy cost of compressors and cost allocation. When looking at these factors, we need to realise what causes dropped efficiency of your compressor, leading to increased costs of compressed air.

Read More

How to avoid falling objects when working at heights

You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed.

Read More

How to prevent hose whiplash

Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. Failure to follow best practice can result in injuries, associated production downtime and decreased productivity.

Read More

Why do I need a dryer for my compressor?

A common questions asked is why do I need an air dryer for my compressor? Typically, air compressors produce water, and although the water can be drained, there can still be aerosol and vapour droplets that are present. This is because water cannoet be compressed. Water can damage your compressor by corroding the valves, pipes and machinery controls, which will cost you time and money to resolve. In the long run, the cost of a new compressor is a small price to pay compared to the loss of production that could potentially arise due to water damage in your compressor.

Read More

What are some preventable causes of air compressor failure?

Air compressors can fail for an assortment of different reasons: Normal wear and tear, lifespan and age of the unit, poor maintenance, power surge, install issues are just a few the come to mind. Check out this blog to find out our top 7 tips to ensure your compressor is looked after!

Read More

Simple Ways to Reduce Your Compressed Air Costs?

Air compressors use considerable volumes of energy during a typical work cycle. When you add up all the expenses of operating a facility, any savings can help you boost your bottom line.

Read More

What Should You Know When Buying a Compressor for the First Time?

If you have never bought a rotary screw air compressor before; do the following. Add up the air consumption of all the equipment at your shop. That will be the amount of air your desired compressor should provide.

Read More

How to Know When Your Industrial Air Compressor Needs Servicing

Knowing the telltale signs of wear and tear, understanding your product’s specifications and usability guidelines, and knowing when it’s prudent to call in repairs are skills that could save you a lot of time, effort, and money in the long term.

Read More

One-stage vs Multi-stage Compressor

Find out the difference between a one-stage compressor and a multi-stage compressor.

Read More

How do I winterise my air compressor?

That cold, rainy, and in some places icey New Zealand winter is upon us, and with the following air compressor tips, your air system will be prepared with the preferred temperatures, despite the weather outside. Regardless of whether or not it actually snows or freezes up where you live, most winterisation service recommendations are also basic, solid maintenance procedures that will help extend the life and operational efficiencies of air compressors regardless of whether you live in Queenstown or Northland.

Read More

How to find the better desiccant dryer

The right desiccant dryer with quality desiccant will improve dryer performance and lifetime and will reduce energy and service costs.

Read More

How to Find the Best Air Compressor for Painting Cars

If you're wondering what an air compressor actually is, you've come to the right place. Simply, air compressors convert power in to air that is pressurised which is then used to power air tools such as spray guns. Air compressors are used in a wide range of applications, so naturally if you want one that will be designed for spray painting your vehicle, you want a compressor specifically made for spray guns! This way your compressor will be able to provide the right amount of power to perform the job.

Read More

How to Optimise Compressor Operating Costs

Compressed air plays a fundamental role in industrial activities. Depending on the type of application, the energy cost of producing compressed air can be very high. Below are some tips to save on you compressor bill.

Read More

Upgrading Your Compressor: When is the Right Time?

Air Compressors are essential tools in a variety of industrial settings. No matter what industry you are in having a reliable air compressor can be a crucial part of getting the job done efficiently. However, like an investment, air compressors require upkeep and maintenance, and eventually will need to be upgraded. But how do you know when it’s time to upgrade your air compressor? Here are some things you need to consider.

Read More

Choosing the right assist gas in laser cutting: nitrogen or oxygen

When it comes to laser cutting and other industrial processes, the choice of assist gas is crucial in achieving optimal results. Nitrogen and oxygen are commonly utilized as assist gases, each with its own unique properties and applications. Understanding the characteristics of both gases, will help you to make an informed decision to ensure precision, efficiency, and cost-effectiveness in your operations.

Read More

Controlling your nitrogen purity made easy

On-site nitrogen generators have many benefits over bottled gas. One is that they allow you to select your nitrogen purity. Here is how.

Read More

What are Mobile Compressors used for?

Mobile air compressors are portable, towable compressors particularly useful for applications that suit the construction and roading industry! You'll often see a mobile compressor being used for sandblasting, irrigation blow-outs, and for quarrying tools such as pneumatic block cutters and rock drills.

Read More

Compressed air so portable it even reaches the moon.

Did you know that Chicago Pneumatic helped man land on the moon? Notice in this photo of the Apollo 11 landing what appear to be "soccer balls" on top of the capsule. They were inflated through a compressor specially developed by Chicago Pneumatic for NASA.

Read More

Where Should I Install my Air Dryer?

Your company purchased an air dryer for your compressor, now where should you install it? One of the most common things we see in the industry are air dryers being stored on top of the compressors. Seems like a wasted space not being used on top of the compressor, right? Wrong.

Read More

What Is Dew Point?

When using air compressors, there are many variables that are integral to the quality and effectiveness of your compressed air. When dryer air is necessary, being able to constantly and accurately monitor dew points can be a critical factor to your operation.

Read More

Why Does A Brewery Need Compressed Air?

Compressed air plays an integral role in breweries both large and small around the world. From start to finish, all details in the brewing process are managed in fine detail and having the right air compressor is no exception.

Read More

How is Nitrogen Used in the Coffee Industry?

We Kiwi's love our Coffee! Coffee, like all other food & beverage products, must go through a preservation process to keep the beans fresh during storage and packaging before they reach the consumer. Coffee that is not properly stored after it is roasted will lose a large amount of carbon dioxide, which lessens its' flavor and speeds up the staling process. One of the most common ways to preserve the freshness of coffee is the use of nitrogen gas. Learn more here:

Read More

How Can I Save on Energy Costs by Using a Screw Compressor?

Air compressors are helpful for an enormous range of applications such as air filling, packaging, tools, HVAC control, and more! One possible drawback is the amount of electricity they use; air compressors can be a huge drain on energy if used inefficiency...

Read More

Which material of pipes should I use for my Air Compressor System?

Air compressors create the energy used by pneumatic tools and processes throughout your compressed air system. The component that connects everything together is the piping. It is very important to choose the right compressed air pipe to avoid pressure loss, rust and other problems.

Read More

Why Do I Need a Back-up Air Compressor?

We get it, buying an air compressor is a big financial decision. And now we are suggesting that you need two air compressors, not just one. Ask yourself one question- Can your business still run if your air compressor goes down?

Read More

Keep It Down – Air Compressor Noise Reduction

It’s no secret – air compressors are excellent sources of energy. Not only do they power essential manufacturing elements and applications, but the heat generated as a result of the compressed air processes can be used as a byproduct that offsets other energy costs. However, there’s another form of energy that is also a consequence of the air compression process – sound.

Read More

How can I maximise the performance of my compressor?

Maintenance is key to continuing the performance of your air compressor. Continue to read about maximising the performance and longevity of your compressor and some air compressor maintenance tips!

Read More

When to use E-Stop on an air Compressor?

The emergency stop, "e-stop", is for true emergency situations only. When hitting the e-stop, all power is halted from the machine and the unload process isn't achieved. The emergency stop button is intended to help with possibly hazardous situations that are developing. Common conditions of having to use the e-stop is the misuse of the equipment in ways that weren’t intended, predictable failures not addressed or failing to consider all the foreseeable uses of the compressor.

Read More

Working Safely with Air Compressors

We've put together a list of tips for working safely with air compressors in your environment! We recommend that you always read owners manual before running your compressor. The number one cause for repairs and personal injury is improper use. You've got to remember to use eye protection and hearing protection when operating your air compressor and try to avoid using air compressors in a wet area.

Read More

An efficient industrial oxygen generator for cost savings

It's generally cost-effective to invest in an on-site industrial oxygen generator. If using bottled or liquid oxygen, you can save 50-90% per unit of O2.

Read More

Air Compressor Installation Tips

Air Compressor Installation Tips Installing Your Reliable Air Compressor

So, you've just bought an efficient and reliable ALUP air compressor? Welcome to the world of compressed air. As your partners in compressed air, we will continue to assist you along your journey. We have provided air compressor installation tips to ensure you get the most out of your air compressor.

Read More

Piston Compressors: Application Areas

Piston compressors – also known as reciprocal compressors – are designed to work within certain limitations. Find out more about them here.

Read More

What is the difference between Wet vs. Dry Vacuum Pumps?

Vacuum pumps generally fall into two main categories: wet and dry. Here's a breakdown of how they differ:

Read More

Blog Focus - Pneumatech: Expert air treatment and industrial gas since 1966

What started as a family business has since grown into the world’s trusted expert in air treatment and industrial gas solutions. It’s a success story we’re proud of, a true testament to the drive and entrepreneurial spirit of our entire team.

Read More

Air dryers: FAQs

Air dryers remove any condensation from the air compressed by your air compressor. Questions about them? Find answers to the most frequently asked questions here.

Read More

Limiting vibrations – it’s all in the balance

Power tools are a key to productivity in the oil & gas or the metal working industry. Maintenance and production tasks must be carried out efficiently, however intensive use of vibrating power tools, such as grinders, can expose operators...

Read More

The benefits of selective soldering with nitrogen

Selective soldering with nitrogen is an essential process in the production of printed circuit boards (PCBs). It is used for bonding components to PCBs that could otherwise be damaged if exposed to a lot of heat. Another area of application are mixed-technology circuit boards with layout constraints.

Read More

Hydrogen production: How is hydrogen made and what is it?

Hydrogen is becoming increasingly important as a promising clean energy carrier – especially with a view to a more climate-friendly future. But have you ever wondered what hydrogen actually is and how it is produced? In this article, we look at the basics and technologies used to produce hydrogen and what makes hydrogen a special element.

Read More

Why does a screw compressor need oil?

Lubrication is vital to numerous parts of the compression process. That’s why it’s important to know why and which oil is needed for your air compressor.

Read More

How to can I check if my spare parts are genuine?

In today's digital world, we search and compare compressor parts, consumables and lubricants in an instant. Avoid being scammed and make shure you buy genuine spare parts.

Read More

Nitrogen generators for the wine industry: Enhancing quality and efficiency

In the world of winemaking, the pursuit of excellence and the preservation of quality are paramount. Therefore, winemakers are turning to a game-changing solution to enhance their craft: nitrogen gas. From preventing oxidation to controlling carbonation, nitrogen plays a vital role throughout the winemaking process.

Read More

Why do Wineries Need Air Compressors?

Your passion is vinification, ours is air compressors.

Compressed air accounts for a large amount of energy consumption in the wine production process, especially in the production of grapes. A big part of wine-making is a result of the work of equipment and is dependent on its efficiency. An air compressor should be located in well ventilated, shaded areas, out of direct sunlight. This includes the inlet for the compressed air system which should be located away from heat sources such as the compressed air outlet, refrigeration or air conditioning plant and equipment.

Read More

Why Do Machine Shops Need Air Compressors?

Cutting, shaping, drilling, and finishing, compressed air is critical for any machine shop. Shops rely heavily on the compressed air system to assist in a variety of operation processes. Commonly the parts produced are used in the machine industry, car industry or even the aircraft industry. A traditional workday in a machine shop requires the use of air compressors to generate an intermittent or continuous source of pressurized air. What machines commonly require compressed air in the shop?

Read More

Compressed Air in Daily Life

Compressed air is a part of our everyday lives in unexpected ways for almost all of us.

Read More

How Loud is an Air Compressor

Causes, risks and solutions for the noise of air compressors

Read More

How to Optimise Compressor Operating Costs

Compressed air is valuable for many industrial processes, but without proper attention and maintenance it can be costly.

Read More

Variable Speed Drive (VSD) Compressors: What to know.

Variable Speed Drive compressors are a game-changer in the world of compressed air. These compressors automatically adjust their operating speeds to match the real-time demand for compressed air. It's an important feature, especially when it comes to energy savings. Surprisingly, the electricity consumed by a compressor can account for the largest portion of its total cost of ownership, not the initial purchase price. On average, VSD technology can reduce energy costs by 35% to 50%, which translates into significant saving

Read More

How to pick the right rotary screw compressor

When an industrial application calls for a steady supply of quality air, more and more users are turning to rotary screw compressors. Their efficiency, reliability and versatility make them a great choice in these cases. But there are countless applications and many different types of rotary screw air compressors. So which one is the right one for you?

Read More

Why is a pneumatic grinder spinning too slowly?

Your tool is stalling, or is not working to its expected performance, and you find yourself asking ‘why is my angle grinder spinning too slowly?’, or ‘why has my pneumatic grinder stopped working?’, read on.

Read More

Choose the right lighting tower and sleep well

Lighting tower reminds night, but also refers to diesel engine. In turn, night reminds us of silence, which is not exactly what we associate with an engine... With urban centers becoming increasingly dense and legislation increasingly strict about noise pollution in construction sites, keeping decibels to acceptable levels has been the great challenge of the main construction equipment manufacturers.

Read More

Energy Recovery in Air Compressors: Harnessing Efficiency for Sustainability

In today’s world of increasing environmental awareness and the drive for sustainable practices, industries are actively seeking innovative solutions to reduce energy consumption and minimize their carbon footprint. If your business uses air compressors, focusing on energy recovery in air compressors is one area to pay attention too.

Read More

Compressor Terminology: What are some commonly Used Acronyms

Sometimes in the world of compressors the lingo can be confusing. Unless you are totally immersed in the compressor industry, some of the terminology might be completely lost on you.

Read More

Why is saving energy important? A focus on ALUP range offered by Ash Air

Did you know that 70% of the total cost of compressor installation consists of energy costs?

There are many reasons why saving energy is important for your business as it helps you in many ways to make your business more efficient as well as providing you with many different forms of value. Ash Air's range of Alup products can help you become more energy efficient to help reduce energy bills, reduce your costs and comply with all environmental legislation.

Read More

What to Know About Compressed Air

Exactly what is compressed air? Where does it come from? What is it for? When we compress—or squeeze—air into a small space, we call it compressed air. When humans discovered the ability to compress air, civilisation made a huge leap forward. The reason? Compressed air opened the door to all kinds of new production methods.

Read More

Compressed Air Filter: Surface Filtering

What is surface filtering? How does it help production? Find out here

Read More

Stay Connected with your Air Compressor Remotely With ICONS

Did you know that conducting an air compressor health check has become even easier? Getting easy and affordable access to your compressor status information at your fingertips with our Intelligent CONnectivity System (ICONS

Read More

Is your Compressed Air Piping leak free?

Compressed air system leaks are indeed a big source of energy waste. Leakage in piping systems have been shown to exhibit leaks of up to 25 percent of the total energy costs. Addressing leaks is one of the first maintenance steps a facility can take to reduce energy costs.

Read More

What to know about Atlas Copco’s Vacuum Solutions Range

Ash Air is proud to introduce Atlas Copco’s Vacuum Solutions in New Zealand. Here are five things to know about Atlas Copco Vacuum Solutions!

Read More

Efficiency of Compressed Air Distribution and Piping

Think about efficiency for a minute. Every year with constant innovation, things are becoming even more efficient. Everything from electronics to industrial machinery are being developed to get more done faster while using less power.

Read More

Luck of the Irish and Compressed Air Give Us Beer

With the Luck of the Irish and a little help from air compressors we will all be enjoying a pint of our favorite beer this St. Patrick’s Day!

Read More

What is compressed air humidity?

The air surrounding us is a mixture of fry air and water vapor. The amount of water in the air depends on the temperature and volume of the gas. The higher the air temperature, the higher the air's ability to absorb more moisture. Find out about compressed air humidity here.

Read More

The Dangers of a Load Too Small for a Diesel Power Generator

The generator starts up, and not long after, white smoke and oil are seen coming out of the exhaust. It is new, and tested, good quality diesel... I wonder what happened?

Read More

7 important gas generation energy saving tips

Investing in an on-site industrial gas generator is a great way to reduce your environmental footprint and your operating costs. Once you have taken this important step, there are some other things you can do to maximize your gas generation energy savings. Here are seven of them.

Read More

The importance of saving energy when compressing air

For many businesses, preserving energy and becoming more sustainable have become top priorities. That not only saves them money but also makes them more competitive in the future, when demand for “green” products and services will only increase. Not just because governments mandate greater sustainability but also because customers expect it.

Read More

Compressed Air in everyday Life

While you relax and read this, do you see an electronic appliance around you? Wondering how could you relate to the current read? We got you! Compressed air is all around, in the electronic appliances you use right now.

Read More

Selecting the right compressed air dryer

How do you know which type of compressed air dryer will best meet your needs? These insights will help you make the right decision.

Read More

How nitrogen makes plant based meat better

How is plant based meat made? And how does nitrogen make it taste better?

Read More

Why are compressed air dryers so important?

There are many contaminants that can threaten your compressed air system, but moisture is among the most prevalent. You may be thinking, but it’s just water, but water can have a devastating impact on your compressed air system, your production equipment, and your end product. The best way to prevent moisture from contaminating your compressed air is with a dryer.

Read More

How to Make Your Air Compressor More Efficient

Compressed air can be one of the most expensive forms of energy for manufacturing plants, often using more energy than other equipment. One horsepower of compressed air requires eight horsepower of electricity. With many air compressors running at efficiencies as low as 10%, there’s often plenty of room for improvement. Fortunately, 50% of compressed air systems at small- to medium-sized industrial facilities have opportunities for low-cost energy conservation.

Read More

Choosing the Right Vacuum Pump for You

As easy as it would make all of our lives, vacuum pumps are far from being “one size fits all”. Not only do you have the size to consider when choosing a vacuum pump, but more importantly type. I will briefly touch on some of the advantages and disadvantages associated with each vacuum technology we deal with. This should give you a better understanding of where to begin your search...

Read More

The keys to generating food grade nitrogen

A nitrogen generator, combined with an air compressor and the necessary air treatment products, can provide you with a steady supply of food grade nitrogen.

Read More

What is a piping quick-drop for?

AIRnet offers moisture-eliminating drop fittings called Quick Drops! Quick Drops make “drop-tees” obsolete, removing the need for extra parts and pipe, while saving time and money.

Read More

What Does Commissioning your Air Compressor Mean?

Proper compressor installation and commissioning helps ensure trouble-free startup and long-term reliability. Thorough inspection and critical review during each phase of the installation process eliminates “built-in” deficiencies or problems which c...

Read More

How to overcome 3 common challenges associated with working with stainless steel

Stainless steel has long been crucial for many applications where strength, durability, and resistance to corrosion are essential. That is why it is often chosen for process equipment used in harsh environments such as chemical and petrochemical plants, refineries, and power stations.

Read More

How to put a price on productivity?

Price is an important consideration when choosing a tool for metalworking applications, but it alone should not be the deciding factor. Other things also contribute to the total cost of ownership, performance, and, ultimately, the overall productivit...

Read More

PSI? CFM? Horsepower? Choosing the Right Compressor

Horsepower? PSI? CFM? There is a lot to consider when purchasing a new air compressor. It is important to understand what you actually need and how to find out.

Read More

Did you say "Christmas Dinner"? What's Compressed Air, Gas, and Vacuum got to do with it?

Yay! It's Christmas! But before the turkey gets carved and a heaping spoonful of Christmas pudding gets dropped on your plate, you might get asked what you’re thankful for. Well, maybe this year you could say you’re thankful for the compressed air, gas and vacuum solutions that made everything on the table possible. Let’s look at how!

Read More

The many benefits of on site gas generation

Are you faced with the decision of whether to switch from purchasing bottled nitrogen or oxygen to on site gas generation? In that case, the decision is easy. You should! Lower costs, the right purity, less transportation emissions, improved safety, no logistics headaches. In all of these areas, on site gas generation is the superior solution. And making the switch is easy. All you need is a gas generator and a supply of compressed air.

Read More

Five Tips to Increase Compressor Installation Efficiency

Did you know that one of the largest costs for industrial manufacturers is compressed air? That’s right – anywhere from 12% to 40% of a facility’s total energy costs come from its compressed air installation. This means that finding innovative ways (no matter how small) to increase compressed air efficiency can amount to big savings over the long run! Items like leak elimination, air audits, reduced pressure bands, and reducing unloaded running hours are some of the most popular ways to decrease energy usage – but there are many other actions that you can take. Read on to discover additional ways to reduce your costs and make sure your compressor system is running as efficiently as possible!

Read More

How to Correctly Size Your Compressed Air Piping System

A properly sized and designed piping system is a necessary component of any distribution compressed air system. Without this key component in place, the delivery of air from the compressor to the specific points of use will be inefficient and costly, both in the short term as well as in the long term. Let’s look more closely at how to size your compressed air piping system to ensure minimal pressure loss while maintaining maximum efficiency.

Read More

Testing for Microorganisms in Compressed Air

Potential for growth of micro-organisms in a compressed air system is tied to the moisture level (dew point) of the compressed air. In simple terms, if there is moisture in your compressed air, microorganisms such as mold and bacteria have the environment they need to grow and thrive. While it’s true that as air is compressed, much of the moisture present in the intake air will condense, enough moisture remains to allow micro-organisms to proliferate.

Read More

The Key Benefits of Monitoring Your Compressor System

Your compressor installation is a workhorse that requires regular service and maintenance to help it achieve maximum efficiency and longevity. This is where compressor monitoring and data gathering technologies come in, as these provide meaningful information on your system that can be visualized, tracked over extended time periods, and used to make insightful decisions regarding compressor performance.

Read More

Aluminum versus cast iron – Which piston compressor material is best?

Some piston compressors use cast iron and others aluminum. But which is better? Here is a look at their differences and respective benefits.

Read More

Why a Variable Speed Compressor?

A variable speed compressor is not for every application. VSD rotary screw compressors need to be ran in a location that is in need of 24/7 compressed air and has a changing demand on the amount of air needed. If your compressed air needs are constan...

Read More

Why Do I Need a Mist Eliminator?

Compressed air purification equipment must have a very low pressure drop, long service life and be strong enough to withstand the most strenuous operating conditions. Protection from oil slugs or compressor air/oil separator failure is essential.

Read More

What do I need to know about ICONS?

Intelligent Connectivity System (ICONS) is the eyes into your compressed air system. Ditch the logbooks, the regular visits to the compressor room and dealing with surprises with your compressor. • Most maintenance organizations operate between 10% to 40% efficiency • Most spend more than 50% of time on emergency work • Reactive maintenance costs 3-5 times more than preventive maintenance.

Read More

How Much Will Compressed Air Cost You?

Compressed air is used in many different industries. From refrigerator manufacturers to toy makers, companies around the world depend on compressed air to produce products. It's so important that many consider it a utility as significant as electricity, water or natural gas.

Read More

Why do you need to filter compressed air?

Compressed air is always contaminated. Contaminants include, • Liquid oil - oil aerosols - oil vapor, Dirt - microorganisms - pipescale, Trace gases: carbon monoxide, sulfur dioxide, nitrous oxide. Learn more about why you need to filter compressed air...

Read More

What is air compressor electric motor efficiency?

As part of a concerted effort worldwide to reduce energy consumption, CO2 emissions and the impact of industrial operations on the environment, regulatory authorities in many countries have introduced legislation to encourage the manufacture and use ...

Read More

Why is air treatment necessary?

Air is always contaminated with solid particles such as dust, sand, soot, salt crystals and water as it leaves the compressor. An effective compressed air treatment system lowers the dew point of the air and takes out the elements that may harm equipment downstream of the compressor and dryer

Read More

Why Do I Have Water in my Compressor Lines in the Winter When I Have a Dryer?

The ambient temperature in an air compressor’s environment can greatly affect your air compressor’s performance. All air compressors will generate some amount of water, but depending on inlet air conditions some can produce large amounts of water.

Read More

What to do with your old compressor?

Just purchased a new compressor? Are you asking yourself, “Now what am I going to do with this old air compressor?”

Read More

Which Parts are Checked and Replaced During Routine Maintenance on my Air Compressor?

Routine maintenance on your screw compressor or piston compressor is vital to ensuring your unit is performing to its full potential. There are simple checks and inspections you can do daily, weekly and monthly to keep your compressor running efficiently and to avoid downtime.

Read More

The Cost of Compressed Air: What are the Lifetime Costs of a Compressor?

Whether you use your air compressor for woodcarving, bottling or manufacturing consumables, compressed air plays a critical role in your business. It is undeniable that compressed air is a valuable source to your applications.

Read More

How much air pressure do I need for my application

There are many things to consider during the selection process of an air compressor for your business. Most important, determining the proper size of the compressor to match your operational needs.

Read More

What Causes the Dewpoint to Spike on your Air Compressor?

Dewpoint spikes immediately after desiccant switchover (line C) indicate that the desiccant was not sufficiently cooled before being brought on-line. Hot desiccant will not adsorb moisture well until it cools down, after which the dewpoint should dro...

Read More

WELCOME TO ASH AIR

NATIONWIDE COMPRESSOR SERVICES

Free Shipping

Give us a call

Chat with us

Locations

BROWSE OUR COMPRESSOR RANGE!

FREE SHIPPING

PRODUCE YOUR OWN NITROGEN AND SAVE!

DISCOVER OUR LATEST RANGE OF VACUUM

Top selling products from our Online Shop

3HP 100L Belt Drive Cast Iron Piston Air Compressor SF302HD

3HP 100L Belt Drive Piston Air Compressor CPBA-3100

CP7763 3/4" Super Duty Impact Wrench, Max Torque 1,630 Nm

1.5HP 6L Oil-free Piston Air Compressor CPRB 6

Condor Pressure Switch | PN: MDR2/11

ALTAIR Piston Oil 1 LTR | PN: 6215716300

DISCOVER OUR COMPRESSED AIR RANGE FOR EVERY REQUIREMENT

Browse our range

ALUP Oil-Free Variable Speed Drive Compressor - 75 - 220 HP range - Class Zero

Pneumatech PPNG 1-12 High Pressure Nitrogen Skids HE

Atlas Copco GHS VSD+ Oil Sealed Rotary Screw Vacuum Pump | 3800 - 5400 VSD+ Series

AIRnet Aluminium Piping System: Designed to Perform! AIRnet saves you 70% on installation time vs. traditional piping systems

ALUP Evoluto 75 Oil Injected Screw Compressor with Variable Speed Drive

Chicago Pneumatic CPVSd 50 Oil Injected Screw Compressor with Variable Speed Drive (VSD)

Online Shop

Sub Categories

Air Compressors & Treatment

Sub Categories

Vacuum Pumps & Blowers

Sub Categories

Nitrogen & Oxygen Gas Generators

Sub Categories

Partnering with large and small, all over New Zealand

Our Nationwide Services

Leak Detection & Energy Audits

Breakdown Recovery & Emergency Air

Service Agreements & 5 Year Warranty

Remote Monitoring & Preventative Maintenance

Vacuum Pump and Blower Service & Overhaul

Installation & Pipe Work Solutions

Our customers say...

Our Latest Blogs

Proportioning the Compressed Air Dryer

Maintenance budget: 8 factors to consider

How to Clean Your Coils?

Why Replace CO2 with Nitrogen in your Brewery

What do I need to know about ICONS?

The Cost of Compressed Air

How to avoid falling objects when working at heights

How to prevent hose whiplash

Why do I need a dryer for my compressor?

What are some preventable causes of air compressor failure?

Simple Ways to Reduce Your Compressed Air Costs?

What Should You Know When Buying a Compressor for the First Time?

How to Know When Your Industrial Air Compressor Needs Servicing

One-stage vs Multi-stage Compressor

How do I winterise my air compressor?

How to find the better desiccant dryer

How to Find the Best Air Compressor for Painting Cars

How to Optimise Compressor Operating Costs

Upgrading Your Compressor: When is the Right Time?

Choosing the right assist gas in laser cutting: nitrogen or oxygen

Controlling your nitrogen purity made easy

What are Mobile Compressors used for?

Compressed air so portable it even reaches the moon.

Where Should I Install my Air Dryer?

What Is Dew Point?

Why Does A Brewery Need Compressed Air?

How is Nitrogen Used in the Coffee Industry?

How Can I Save on Energy Costs by Using a Screw Compressor?

Which material of pipes should I use for my Air Compressor System?

Why Do I Need a Back-up Air Compressor?

Keep It Down – Air Compressor Noise Reduction

How can I maximise the performance of my compressor?

When to use E-Stop on an air Compressor?

Working Safely with Air Compressors

An efficient industrial oxygen generator for cost savings

Air Compressor Installation Tips